Operation Manual

88 GMC-I Messtechnik GmbH
SECULIFEESXTRA
The tools screen allows the user to adjust system settings as well as update the SECULIFE ESXTRA
firmware or calibrate the touchscreen. There are two pages of system tools. The arrows at the bottom of
the page navigate through the system setup pages. The round indicators at the bottom of the screen
identify which page is currently viewed.
Open Test Data File - This button allows for quick access to previously stored Autosequence Results,
Load Curve Results, or RF Waveform data.
Set Time and Date - This button shows the Date and Time configuration screen. To change the Date or
Time, press the appropriate button.
Then the Date/Time settings are set by scrolling the display to the desired value. Once the proper setting
is shown, the Date/Time button is pressed again to accept the change.
SYSTEM TOOLS