Operation Manual

94 GMC-I Messtechnik GmbH
SECULIFEESXTRA
Networking - The networking screen shows the current network information and allows the user to select
DHCP (automatic) or Static IP address mode.
Address Type - The user can select whether the IP address is received automatically from a DHCP
server or configured for a Static IP address.
NOTE: AFTER CHANGING THE ADDRESS TYPE, THE SYSTEM WILL NEED TO BE REBOOTED FOR
THE CHANGES TO TAKE EFFECT.
IP Address - This field identifies the IP address when DHCP is enabled or allows the user to enter an IP
address when the Static Address Type is selected.
Subnet Mask- This field identifies the Subnet Mask when DHCP is enabled or allows the user to enter a
Subnet Mask when the Static Address Type is selected.
Default Gateway - This field identifies the Default Gateway when DHCP is enabled or allows the user to
enter a Gateway address when the Static Address Type is selected.
MAC Address - This read only field identifies the MAC address of the SECULIFE ES
XTRA.
Network Name - This identifies the SECULIFE ES
XTRA on the network. The default name is SECULIFE
ESXTRA_xxxx where "xxxx" is the SECULIFE ES
XTRA serial number. Network names must be unique
for each device on a network. The network name is used when browsing the SECULIFE ES
XTRA on the
network. For the example above, the SECULIFE ES
XTRA could be viewed in windows explorer by typing
in \\SECULIFE ESXTRA_1011 in the address field.