Operation Manual

GMC-I Messtechnik GmbH 95
SECULIFEESXTRA
Remote Mode - This mode allows the SECULIFE ESXTRA to be controlled from a remote PC on a
network. To activate Remote mode, connect the SECULIFE ES
XTRA to the network. Then press the Go
To Remote Mode button. The SECULIFE ES
XTRA can guide the operator through the process of setting
up the remote mode connection. The CERHost utility mentioned in the procedure can be found on the
SECULIFE ES
XTRA by browsing to the device on the network in windows explorer by typing \\SECULIFE
ESXTRA_xxxx\Utility in the address field where xxxx is the serial number of the SECULIFE ES
XTRA.
Step 1 —Start
Step 3 —Connect to SECULIFE ES
XTRA
Step 2 — Start Connection
Step 4 — Blank SECULIFE ES
XTRA screen