Operation Manual

GMC-I Messtechnik GmbH 97
SECULIFEESXTRA
Go To Internet - This button can be used to open internet explorer or to simply validate that the network
connection is functioning properly.
RS-232 Terminal - This button opens the terminal screen, which allows for a direct RS 232 connection to
the DUT. A Null modem is required to connect the SECULIFE ES
XTRA to a PC. Some devices require
RS-232 commands to enable calibration or service modes. To send data from the SECULIFE ES
XTRA
terminal, an external keyboard is required. The terminal can be configured by pressing the Setup button.
The SECULIFE ES
XTRA load can be set using the Load button at the bottom of the screen. The current
measurement is also shown.