Datasheet

SLP KONSTANTER Series SLP 120 / 240 / 320
Laboratory Power Supplies
2 GMC-I Messtechnik GmbH
Output Working Range
Analog Interface
Connection 11-pole plug-in terminal strip
Reference potential Output negative pole
floating TRG input
Connector Pin Assignments:
Applicable Regulations and Standards
PIN Designation Function
1 SIG1 OUT status signal output for input ON / OFF
(open collector, max. 30 V – / 20 mA)
2 SIG2 OUT status signal output control mode CV / CC
(open collector, max. 30 V – / 20 mA)
3TRG IN +
digital control input for input ON / OFF
(low: < 1 V, high: 4 ... 26 V), floating input
4TRG IN –
5 +15 V auxiliary voltage: +15 V / max. 40 mA
reference point connected to –output with
reversible fuse
6AGND
7U
set
– analog, inverted voltage control input
(0 ... –5 V corresponds to 0 ... U
nom.
, Ri = 10 kΩ)
8U
set
+ analog voltage control input
(0 ... +5 V corresponds to 0 ... U
nom.
, Ri = 10 kΩ)
9I
set
+ analog current control input
(0 ... +5 V corresponds to 0 ... I
nom.
, Ri = 10 kΩ)
10 U-MON output voltage measurement output
(0 ... 10 V corresponds to 0 ... U
nom.
, Ri = 9.8 kΩ
11 I-MON output current measurement output
0 ... 10 V correspond to 0 ... I
nom.
, Ri = 9.4 kΩ)
U/V
U
nom.
I/A
I
nom.
0
0.5 I
nom.
P
nom.
Short-Time
Operating Range
Voltage
Setting Range
Current
Setting Range
0.5
U
nom.
IEC 61010-1/EN 61010-1/
VDE 0411-1
Safety requirements for electrical equipment
for measurement, control and laboratory use
– General requirements
VDE 0160:1988 + A1:1989
class W1
Equipment of power systems with electronic
components
EN 60950:1992
VDE 0805:1990
Safety of IT systems
EN 60529
VDE 0470 Part 1
Test instruments and test procedures
– Protection provided by enclosures (IP code)
IEC 68-2-6:1990 Vibration resistance
IEC 68-2-27:1989 Impact resistance
EN 61326-1:1997
+ A1: 1998
Electromagnetic compatibility (CEM)
Product standard
EN 55022:1998 class A
Electromagnetic Compatibility (CEM)
Generic standard interference emission –
industrial sector
EN 61000-4-2:1995
EN 61000-4-3:1996 +
A1:1998
EN 61000-4-4:1995
EN 61000-4-5:1995
EN 61000-4-6:1996
EN 61000-4-11:1994
Electromagnetic Compatibility (CEM)
Generic standard interference immunity –
industrial sector