Printer User Manual

In the case of standard mode:

If d is outside the definable range, only paper feed is

executed, and subsequent data is processed as normal

data.

If the barcode width exceeds the print area of one line,

the barcode is not printed, and only paper feed is

executed.

Regardless of the amount of line feed specified by the

following commands, the paper is fed by the amount

equal to the barcode height (including HRI characters if

HRI character print is specified):

* (ESC 2:“ Sets initial line feed“)

* (ESC 3:“Sets line feed“)

Effective only if no data is contained in the print buffer. If

data is contained in print buffer, the data after m is

processed as normal data.

Moves the print position to the start of the next line after

barcode print is completed.

Has no effect on print modes (underline, character size)

excluding NORMAL.