Owner manual

GOSSEN Foto- und Lichtmesstechnik GmbH 7
In the second step install the DUT. The measured light source (DUT) has to be switched
off. Only the auxiliary light source mounted in MAVOSPHERE will be used for this
measurement. Run the measurement by clicking the Next button.
The next step is to specify the name of the correction file. The software by default is
suggesting the existing name from the list. You can copy the name of the correction file
by clicking the existing name. When the name is set click the Finish button.
At this stage it is also possible to remove unwanted existing correction files. Select the
file and click Delete selected button.