Operation Manual

Function groups / measuring capabilities
selectable with DIP Switches in the battery
compartment
Setting the film speeds
- Press an hold the ISO1 or ISO2 button
- Set the desired ISO value using the
setting wheel, (e.g. 200)
- Corresponding values for ISO2 calculated
based on the measuring results for ISO1
Measuring modes
- Select incident light or reflected light
measurement with diffuser ring
Ambient light
- Press the left menu button to select
ambient light
- Press the left menu button and select with
setting wheel desired function , EV or
- Release menu button
- Set desired f/stop or exposure time with
setting wheel
- Press the button M to measure
Flash light
- Press the right menu button to select
flash light
- Select sync speed with setting wheel
- Press the button M to measure
Cord: flash will be automatically triggered
Noncord: for 45s the meter is ready for
manual triggering of the flash
Contrast measurements
- Keep M pressed and scan subject
Averaging
- Take first measurement with button M
- Take further measurements with AVR
CINE / Photometry
- Set switch DIP1 in battery compartment to
CINE
CINE
- Press the left menu button to select
ambient light
- Press the left menu button and use the
setting wheel to select measuring unit
- Release menu button
- Set desired number with setting wheel
- Press the button M to measure