ENG Condensed Instructions 15100 • 1/05.01 Reflected light measuring 1° Retractable diffuser Reflected light measuring 5° Meas.
Use DIP Switches in the battery compartment for setting and selecting function groups and measuring capabilities. Setting the film speeds – Press and hold the ISO or ISO 2 button – Set the desired ISO value using the setting wheel, e.g.
Flash light – Press the right Function button to select flash light – Preselect the desired measuring time (sync speed) with the setting wheel – Press the button Cord: the flash is being automatically triggerd when pressing Noncord: for 45 s the meter is ready for manual triggering of the flash Contrast measurements – Keep depressed and scan subject Averaging – Take first measurement with button – Take further measurements with CINE / PHOTOMETRY – Set DIP switch 1 in battery compartment to CINE CINE – Pres
– Set the desired number with the setting wheel alone – Press the button CINE — Setting shutter angles other than 180° – Simultaneously press both Function buttons and – Use setting wheel to set the desired angle Photometry – Select with the corresponding Function button ambient light or flash – Set the diffuser ring at the meter head to the desired measuring function – Use setting Function button and setting wheel to select the corresponding measuring function – Press the button Please refer to the enclose
