Owner manual

GOSSEN Foto- und Lichtmeßtechnik 27
8 Setting and measuring correction values
and extension factors
8.1 Setting correction values
– By simultaneously pressing both function
buttons ( and ) you reach the function
-correction values.
– The last valid correction value appears in the
display.
– The desired correction value can be entered or
altered using the setting wheel.
The extension factor is shown in the right digital
display, and the correction value is indicated in
stops. Input in 1/10 EV (small digits) in the range of
±9.9 exposure value stop increments.
For correction values which extend the exposure a
"–" appears in front of the number.
Example:
–3.1 stops correspond to the extension factor 8.6.
For corrections which shorten the exposure, only
the left display appears as EV difference in stop
increments. By pressing one of the function but-
tons ( or ) the correction value is stored in the
memory of the Starlite. The symbol appears
in the display.
The correction value is automatically taken into
account in all measuring functions (except for
the photometry).