Real time vehicle & maintenance notifications GPS enabled to locateyour car Easy to install and set up STEP 1 Download The Motion App The Motion app is available for free on the Apple App Store and on Google Play.
visit www.moj.io/getmotion Tip: Make sure you are running the latest version of your operating system and that your phone meets the minimum technical requirements to run the app. STEP 2 Create Your Account Run the Motion app on your smartphone, press ‘Sign Up’ on the home screen, and follow the prompts to create your new Mojio account.
You will be asked to verify your mobile phone number via SMS. The app will walk you through the rest of the steps. Tip: If you already have an existing Mojio account, please use your existing credentials to log in. Insert The Micro-SIM Card Use the included tool to eject the tray for theSIM from the the SyncUP DRIVE™ device. Position the micro-SIM card in the tray so that itsits flush and insert the tray.
STEP Scan The IMEI Barcode Your SyncUP DRIVE™ device has a unique15 digit code called the IMEI. The code is shown as a barcode on a sticker on the device. You will find the IMEI on the sticker on your device .
the barcode or manually enter the IMEI code. Tip: Do not plug the device into your car until prompted by the Motion app. STEP 5 Locate Your OBD Port The OBD (On Board Diagnostics) port is usually located underneath the driver’s side dashboard, often within 18 inches of the steering wheel. If you are having trouble locating your car’s OBDport, the Motion app can help you find it.
Tip: Press the flashlight icon in the Motion app to turn on your smartphone’s flashlight when searching for your OBD port. STEP 6 Install Your Device Now that you’ve found your OBD port, you are ready to install the device. Align your device with the port and firmly plug the device in. It should fit snugly. Tip: To ensure a snug connection, be sure to properly align the device with your OBD port before plugging it in.
STEP 7 Go For A Drive The device needs to establish its cellular connection and generate a GPS lock. Go for a 10 minute drive to finish setting up your device. Motion will notify you once a successful connection is established. Distracted driving is never OK. Do not use your phone while driving.
Understanding Your OBD-II Device 1 2 3 4 Device reset hole Micro-SIM card slot Restart key LED 1
5 LED 2 6 OBD-II interface LED Status Lights LED INDICATOR LED 1 (Power) LED STATUS Green blinking The device is being powered by the internal battery LED 1 (Power) Green solid The device is being powered by the vehicle LED 2 (Signal) Red solid The device is on but is not connected to the cellular network LED 2 (Signal) Green solid The device is connected to the 4G network but no data is being transferred
LED 2 (Signal) Green blinking The device is connected to the 4G LTE network and data is being transferred Legal Copyright © 2020 GoSunCN CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of GoSunCN Corporation. The manual is published by GoSunCN Corporation.
prior notice. Mojio, Mojio Motion, Made for Mojio, Powered by Mojio, and the Mojio logo are trademarks and registered trademarks of Moj.io Inc. Moj.io attributes © 2016 Moj.io Inc. All Rights Reserved. See www.moj.io for additional information, including privacy policy and terms and conditions of use. Support Need more help? Get in touch with Mojio General Customer Care & Technical Support. Customer Care representatives are available daily from 3:00am to 10:00pm PT.
Call Us - TTY TTY service is available for the hearing and speech impaired. Hours are 5:00am to 10:00pm PT, daily. Call us via TTY toll free at 1-877-296-1018 For access to our Mojio Support Community, visit: https://support.Mojio.
