User Guide

All Rights reserved, No Spreading abroad without GOSUNCN Permission 13
ME3630
Hardware Development Guide
WCDMA: B1,B8
J2A&J2AS
LTE FDD: B1, B3, B5, B7,B8, B18, B19, B21
WCDMA: B1, B5, B6, B8, B19
Transmission Rate
LTE FDD (CAT4): Max 150Mbps(DL)/Max 50Mbps(UL)
Network Protocols
Support TCP/PPP/UDP/FTP protocols
Support PAP, CHAP protocols used for PPP connection.
USIM Interface
1.8V/3V support
SIM extraction/hot plug detection
Support SIM and USIM
UART Interface
Support two UART interface: main UART interface and debug UART interface
Main UART interface:
Eight lines on main UART interface
Support RTS and CTS hardware flow control
Baud rate can reach up to 921600 bps,115200 bps by default
Used for AT command, data transmission or firmware upgrade
Debug UART interface:
Two lines on debug UART interface, can be used for software debug, firmware upgrade
USB Interface
Compliant with USB 2.0 specification (slave only)
Used for AT command communication, data transmission, software debug and firmware upgrade.
USB Driver
Support Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10,
Windows CE5.0/6.0 and later,
Linux 2.6.20 and later,
Android 2.3 / 4.X/ 5.X
SDIO interface
1.8V support (full speed) 4bits,SDIO compatible to WLAN (802.11)
Antenna Interface
Include main antenna ,diversity antenna and GNSS antenna
Rx-diversity
Support WCDMA/LTE Rx-diversity
AT commands
Compliant with 3GPP TS 27.007,27.005 and GOSUNCN enhanced AT commands
Network Indication
Use LED_MODE to indicate network connectivity status
SMS
Text and PDU mode
Point to point MO and MT
SMS saving/reading to SIM card or module storage
SMS cell broadcast
Temperature Range
Normal operation: -30°C to +75°C
Restricted operation: -40°C~ -30°C and +75°C~ +85°C
1)
Storage temperature: -40°C to +85°C
Firmware Upgrade
USB interface or UART interface or OTA(WEFOTA)