User Guide

All Rights reserved, No Spreading abroad without GOSUNCN Permission 54
ME3630
Hardware Development Guide
Tracking sensitivity
-156dbm
Cold-start sensitivity
-144dbm
TTFF (Open Sky)
Hot start: 4s
Cold start: 32s
Receiver Type
Qualcomm GNSS Gen8C
GNSS L1 Frequency
1575.42MHz
Update rate
2-4 HZ
GNSS (GNSS/GLONASS) data format
NMEA data protocol/GOSUNCN defined at commands
GNSS (GNSS/GLONASS) Current consumption
65mA
GNSS (GNSS/GLONASS) antenna
Passive/Active antenna
4.6. ME3630-E TEST
4.6.1. CURRENT CONSUMPTION
The values of current consumption in different operating mode are shown below.
Table 4–11 Averaged standby DC power consumption [1]
Parameter
Condition
Typical Value
Unit
Sleep state
Sleep mode ( LTE )
2.5
mA
Sleep mode (WCDMA)
1.8
mA
Sleep mode ( GSM)
2.7
mA
Table 4–12 Averaged working current [1]
Parameter
Condition
Typical Value
Unit
LTE
LTE FDD Band 1, Pout=23dBm
785
mA
LTE FDD Band 3, Pout=23dBm
731
mA
LTE FDD Band 7 ,Pout=23dBm
902
mA
LTE FDD Band 8,Pout=23dBm
671
mA
LTE FDD Band 20, Pout=23dBm
915
mA
Table 4–13 Averaged working current [2]
Parameter
Condition
Typical Value
Unit
WCDMA
Band1, Pout=24dBm
670
mA
Band8, Pout=24dBm
558
mA
Table 4–14 Averaged working current [3]
Parameter
Condition
Typical Value
Unit
GSM
Band3, Pout=24dBm
290
mA
Band8, Pout=24dBm
199
mA
4.6.2. RF OUTPUT POWER
The following table shows the RF output power of ME3630 module.