User Guide

All Rights reserved, No Spreading abroad without GOSUNCN Permission 55
ME3630
Hardware Development Guide
Table 4–15 Conducted RF Output Power
Frequency
Max
Min
LTE FDD Band 1
23±2.7dBm
-39dBm
LTE FDD Band 3
23 ±2.7dBm
-39dBm
LTE FDD Band 7
23 ±2.7dBm
-39dBm
LTE FDD Band 8
23 ±2.7dBm
-39dBm
LTE FDD Band 20
23 ±2.7dBm
-39dBm
WCDMA Band 1
24+1/-3 dBm
-50dBm
WCDMA Band 8
24+1/-3 dBm
-50dBm
GSM Band3
33+2/-2 dBm
0±5dBm
GSM Band8
30+2/-2 dBm
5±5dBm
4.6.3. RF RECEIVING SENSITIVITY
The following table shows the conducted RF receiving sensitivity typical value of ME3630 module.
Table 4–16 Conducted RF Receiving Sensitivity Typical Value [1]
Band
10 MHz(dBm)
20 MHz(dBm)
LTE FDD Band 1
-94
LTE FDD Band 3
-94.2
LTE FDD Band 7
-92.4
LTE FDD Band 8
-93.7
LTE FDD Band 20
-96.5
Table 4–17 Conducted RF Receiving Sensitivity Typical Value [2]
Band
Sensitivity
WCDMA Band 1
-109.8 dBm
WCDMA Band 8
-110.2 dBm
Table 4–18 Conducted RF Receiving Sensitivity Typical Value [3]
Band
Sensitivity
GSM Band3
-109 dBm
GSM Band8
-109dBm
4.7. ME3630-J2A TEST
4.7.1. CURRENT CONSUMPTION
The values of current consumption in different operating mode are shown below.
Table 4–19 Averaged standby DC power consumption [1]
Parameter
Condition
Typical Value
Unit
Sleep state
Sleep mode
2.43
mA
Table 4–20 Averaged working current [1]
Parameter
Condition
Typical Value
Unit
Bandwidth
5MHz
10MHz
15MHz
20MHz
LTE
LTE FDD Band 1, Pout=23dBm
629
mA