How to use Gosund with AP Mode AP Mode 1.
. Choose Other Mode :
. Choose AP Mode (indicator slowly blink) :
. Make sure “the indicator light slowly blinks”, then “Confirm” :
. Enter your home Wi-Fi password, please make sure the password is correct, then confirm :
. Clink “ Go to Connect ” :
. Choose the smart plug’s Wi-Fi hotspot named Smart Life_XXX (Note: every smart device has a separate name based on device id) :
. Clink “ No ” :
. Then go back to Connecting, wait the connection to 100% :
. Successfully, and you can rename the plug if you like, then click“Done”:
