Safety Instructions

ManualsBrandsGOTO ManualsBattery ChargersWireless Charging Pad 10W

Status LED

Start-up (Power On) Solid White 3 Seconds

Charging Solid White

Fully Charged Solid White

Insufﬁcient from Power Source Intermittent White Light

FOD (Foreign object detected) Solid Amber

Temperature Fault Solid Amber

Power Source Error Solid Amber

Standby None/Off

• It’s recommended to use the provided wall adapter & Type C cable to

power your wireless charging pad.

• Place your Qi-enabled smartphone so that the center aligns with the center

of the pad.

8850-01592 Rev. A00

• It is recommended to use the bundled wall adapter & Micro USB cable.

• The wall adapter must be at least QC2.0 or above with output an output of 9V/2A

• Place your smartphone so that the center aligns with the center of the pad.

• LED light will indicate charging status as summarized in the table below.

• Do not place magnetic mounts, metal cases, keys, coins, or other objects between your phone and

the charger. It might reduce performance or damage magnetic strips or RFID chips like those found in

some credit cards, security badges, and passports. If your case holds any of these sensitive items, remove

them before charging or make sure they aren’t between the back of your phone and the charger. The pad

has sensors which detects objects which are not supposed to be placed to prevent the charger emitting

unnecessary power and heat that could damage your smartphone and other heat-sensitive items.

Safety Instructions:

1. Please read these instructions before using the device to ensure safe and proper use.

2. Connect the wall adapter of the wireless charging pad into a socket outlet that is close by and is easy to

disconnect from the source.

3. Use indoors and in a dry location only; keep away from wet or damp locations.

4. Keep wireless charging pad and wall adapter away from any liquids or moisture.

5. Unplug the wireless charging pad when unused for long periods of time.

6. Do not store your device in very hot or very cold areas. It is recommended to use your device at room

temperatures.

7. Caution: If you experience problems with the wireless charging pad, please discontinue use, unplug the wall

adapter of the wireless charging pad from the AC socket, and contact T-Mobile for assistance.

8. Do not use if visible defects are observed on the wireless charging pad or wall adapter. Do not attempt to

service or disassemble.

Wireless Charging Pad 10W

SKU/MODEL: TM0021P

• LED light will indicate charging status as summarized in the table below.

• Do not place magnetic mounts, metal cases, keys, coins, or other objects

between your phone and the charger. It might reduce performance or damage

magnetic strips or RFID chips like those found in some credit cards, security

badges, and passports. If your case holds any of these sensitive items, remove

them before charging or make sure they aren’t between the back of your

phone and the charger. The pad has sensors which detects objects which are

not supposed to be placed to prevent the charger emitting unnecessary power

and heat that could damage your smartphone and other heat-sensitive items.

Safety Instructions:

1. Please read these instructions before using the device to ensure safe and

proper use.

2. Connect the wall adapter of the wireless charging pad into a socket outlet

that is close by and is easy to disconnect from the source.

3. Use indoors and in a dry location only; keep away from wet or damp

locations.

4. Keep wireless charging pad and wall adapter away from any liquids or

moisture.

5. Unplug the wireless charging pad when unused for long periods of time.

6. Do not store your device in very hot or very cold areas. It is recommended

to use your device at room temperatures.

7. Caution: If you experience problems with the wireless charging pad, please

discontinue use, unplug the wall adapter of the wireless charging pad from the

AC socket, and contact T-Mobile for assistance.

8. Do not use if visible defects are observed on the wireless charging pad or

wall adapter. Do not attempt to service or disassemble.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC

COMPATIBILITY

We, T-Mobile, of 12920 SE 38th St., Bellevue, WA 98006, Tel:+1(877)453 1304,

declare under our sole responsibility that the product, to which this declaration

relates, complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy,

and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment

If device is placed

correctly in the

middle and charging,

the light will be solid

white.

If device is not

placed correctly in

the middle, it will not

charge and the light

will be off.

Do not place foreign

objects on the pad,

the light will be solid

amber for certain

objects.

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try

and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to operate this

equipment.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. End users must follow the speciﬁc operating

instructions for satisfying RF exposure compliance. To maintain compliance

with FCC RF exposure compliance requirements, please follow operation

instructions as documented in this manual. This equipment should be installed

and operated with a minimum distance of 20 cm between the radiator and your

body.

See T-Mobile’s Terms and Conditions (including arbitration provision) at

T-Mobile.com, for additional information, and restrictions and details. T-Mobile

and the magenta color are registered trademarks of Deutsche Telekom AG.

1 2

3 4

Business Unit:

Program Manager:

Packaging Engineer:

Material:

Blank Size (in):

Side Shown:

L x W x D (mm):

DIE LAYOUT

Unit:

Flute/Grain:

REV

Intermediate

PRINT SIDE

L x W x D (in):

[285.750]

[95.250]

[110.109]

FRON T

BACK

QIG/FCC Statement

70 gsm woodfree paper

IN/MM

Drawing Scale 1:1

Retail Outside Dimension (Including Hang Tab)

DO NOT PRINT

DIE LINES, PRINTERS NOTES

PRINT SPECS:

DIE/MATERIAL SPECS:

Die Line File:

Core

Matthew Duffy

Please refer to drawing

IDL_TM0007P_T-MOBILE 10W WIRELESS CHARGING PAD QIG-FCC

Color Plates:

Notes:

Artwork File:

vertical

RELEASE DATE:

08/02/2019

Tolerance:+/- 1/32" - 0.8mm

Blank Size (mm):

Finish:

DIELINE:

THIS DOCUMENT & THE INFORMATION

IN IT ARE THE CONFIDENTIAL PROPERTY

OF BELKIN INTERNATIONAL AND MUST

NOT BE COPIED, REPRODUCED OR USED

IN ANY MANNER WITHOUT THE WRITTEN

CONSENT OF BELKIN CORPORATION.

IT MUST BE RETURNED UPON REQUEST

This dieline works for following skus (if any):