Quick Install Guide

A
p
p Credentials and Device Information
1.
Aft
er full review of the provided Quick Install Guide, power up the Watchman unit.
2.
Allo
w at least 10 minutes after power up for cellular signal to connect.
3.
■ On
WP450 s
eries, enter the device number into the
key
pad then press the key symbol .
WP450 Series
4.
W
a
it 60 seconds.
5.
Lo
gin to the Cellgate Mobile Connect app with the
username and password provided above.
6.
Sel
ect the device number for the unit you’re currently activating.
7.
Sel
ect the “Internal Camera”.
8.
Pr
ess “Take Picture”.
(The device is not embedded in other cell
phone devices, but by inserting Ethernet cable into the only network ports on the it that can connect to 3G/4G router,
then to Cellgate Mobile Connect app. The protocol is TCP/IP.)