User Manual

Temperature Oil requirement
Bearing temperatures exceed 180°F (82°C) Use ISO viscosity grade 100 with bearing-frame
cooling or finned-tube oil cooler. The finned-tube
oil cooler is standard with the HT 3196 model and
optional for all other models.
Pumped-fluid temperatures exceed 350°F (177°C) Use synthetic lubrication.
Acceptable oil for lubricating bearings
Acceptable lubricants
Brand Lubricant type
Chevron GTS Oil 68
Exxon Teresstic EP 68
Mobil DTE 26 300 SSU @ 100°F (38°C)
Philips Mangus Oil 315
Shell Tellus Oil 68
Sunoco Sunvis 968
Royal Purple SYNFILM ISO VG 68 Synthetic Lube
Brand Lubricant type
Castrol Hyspin R&O 220
Chevron GST 220
Exxon Teresstic 220
Mobil DTE Oil BB
Mobil Gear 630
Shell Marlina 220
Tellus 220
Sunoco Sunvis 9220
Texaco Regal R&O 220
Rando HD 220
Royal Purple Synfilm GT 220
Synergy 220
Lubricate the bearings with oil
Use a high-quality turbine oil with rust and oxidation inhibitors.
1. Remove the fill plug.
2. Fill the bearing frame with oil through the filler connection, which is located on top of the bearing
frame.
Fill the bearing frame with oil until the oil level reaches the middle of the sight glass (319).
113A
319
Oil lubricated
bearings
Correct
level
Commissioning, Startup, Operation, and Shutdown
50 Model 3198 i-FRAME Installation, Operation, and Maintenance Manual