INSTRUCTION MANUAL Sump and Effluent Pump
Table of Contents Table of Contents 1 Introduction and Safety..............................................................................................................2 1.1 Introduction.......................................................................................................................... 2 1.2 Safety..................................................................................................................................... 2 1.2.1 Safety terminology and symbols...............
1 Introduction and Safety 1 Introduction and Safety 1.1 Introduction Purpose of this manual The purpose of this manual is to provide necessary information for: • Installation • Operation • Maintenance CAUTION: Read this manual carefully before installing and using the product. Improper use of the product can cause personal injury and damage to property, and may void the warranty. NOTICE: Save this manual for future reference, and keep it readily available at the location of the unit. 1.
1 Introduction and Safety Hazard level Indication WARNING: A hazardous situation which, if not avoided, could result in death or serious injury CAUTION: A hazardous situation which, if not avoided, could result in minor or moderate injury Notices are used when there is a risk of equipment damage or decreased performance, but not personal injury. NOTICE: Special symbols Some hazard categories have specific symbols, as shown in the following table.
1 Introduction and Safety 1.3 Protecting the environment Emissions and waste disposal Observe the local regulations and codes regarding: • Reporting of emissions to the appropriate authorities • Sorting, recycling and disposal of solid or liquid waste • Clean-up of spills Exceptional sites CAUTION: Radiation Hazard Do NOT send the product to Xylem if it has been exposed to nuclear radiation, unless Xylem has been informed and appropriate actions have been agreed upon.
2 Transportation and Storage 2 Transportation and Storage 2.1 Inspect the delivery 2.1.1 Inspect the package 1. Inspect the package for damaged or missing items upon delivery. 2. Note any damaged or missing items on the receipt and freight bill. 3. File a claim with the shipping company if anything is out of order. If the product has been picked up at a distributor, make a claim directly to the distributor. 2.1.2 Inspect the unit 1. Remove packing materials from the product.
3 Product Description 3 Product Description 3.1 General description Description Sump pumps are designed to run intermittently and usually seasonally. Intended applications WARNING: California Proposition 65 warning! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Specially designed for the following uses: • Basement draining • Water transfer • Effluent transfer • Filtered effluent 3.
3 Product Description Warning device alarms Table 1: Model information Alarm order no.
3 Product Description NOTICE: Failure to install a warning device or a suitable back up sump pump may lead to property damage when there is a loss of pump function in the main sump pump.
4 Installation 4 Installation 4.1 Preinstallation WARNING: • Disconnect and lock out electrical power before installing or servicing the unit to prevent unexpected start-up. • Do NOT install this pump in swimming pools or marine areas. • Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. Install or connect to a circuit that is protected by a GFCI, ground fault circuit interruptor.
4 Installation 4.1.2 Piping checklist Guideline Explanation Discharge pipe should be the same size as the pump. This insures optimum performance. Undersized pipe can dramatically reduce the flow and waste energy. 4.2 Typical installation Typical pump installation in sump; Tether float shown, float not needed on models with included float. 1 2 8 3 7 4 6 5 9 1. 2. 3. 4. 5. 6. 7. 8. 9.
4 Installation NOTICE: • Use only copper wire to the drive unit and the ground (earth) . The ground (earth) wire must be at least as thick as the wire to the drive unit. • Conductors should have color codes to make the maintenance easier. 4.4 Install the pump DO NOT place the pump directly on earth, gravel or debris. This can cause excessive wear of the impeller and possible jamming. A. Provide a hard level bottom of bricks or concrete. B. Remove all debris from the bottom of the sump pit. 1.
5 Operation 5 Operation 5.1 Start the pump 1. Turn the power On at the breaker panel and/or the disconnect switch. 2. Fill the basin with water and observe the level of water where the pump turns On and Off. The pump should go On well before the water overflows the top of the sump. The pump should go Off before the water gets below the pump suction. 3. Install a cover on the sump pump basin if there is a danger of debris, children, or pets falling into the basin.
6 Maintenance 6 Maintenance 6.1 Maintenance guidelines • Check frequently for debris and/or build-up which can interfere with pump or float operation. • Test pump periodically throughout the seasons. 1. Fill sump with water. 2. Check for debris and proper switch operation. 3. Remove debris which could clog the suction strainer or jam the switch. 4. Insure that the switch operates freely and does not hit the sump wall or hang-up on piping or power cords.
7 Troubleshooting 7 Troubleshooting 7.1 Operation troubleshooting Symptom Cause Remedy Motor not running Tripped thermal protector Check that all pump functions and components are operating correctly. Allow the unit to cool for 30 minutes. If the thermal protector does not reset and no other causation exists, replace the pump. Open circuit breaker or blown fuse Check that the unit is securely plugged in. Have an electrician check all wiring for proper connections and adequate voltage and fuse sizes.
8 Product warranty 8 Product warranty Commercial warranty Warranty.
8 Product warranty Limited consumer warranty Warranty.
8 Product warranty To make a warranty claim, check first with the dealer from whom you purchased the product or visit www.xyleminc.com for the name and location of the nearest dealer providing warranty service.
Xylem |’zīləm| 1) The tissue in plants that brings water upward from the roots 2) A leading global water technology company We’re a global team unified in a common purpose: creating innovative solutions to meet our world's water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work.
