Instructions / Assembly
Table Of Contents
- 1 Introduction and Safety
- 2 Handling and Storage
- 3 Technical Description
- 4 Installation
- 5 Use and Operation
- 5.1 Precautions
- 5.2 Before starting
- 5.3 First starting
- 5.4 Air purge
- 5.5 Setting the timer
- 5.6 Operation modes
- 5.6.1 Fix speed models
- 5.6.2 Variable speed models
- 5.6.3 Fix speed models with fix value temperature control
- 5.6.4 Fix speed models with variable value temperature control
- 5.6.5 Autocirc pumps
- 5.6.6 LED light
- 5.6.7 Motor protection from overtemperature
- 5.6.8 Dry run protection
- 5.6.9 Power Down Reset (PDR)
- 5.6.10 Temperature sensor error mode
- 6 Maintenance
- 7 Troubleshooting
- 8 Technical Information
- 9 Disposal
- 10 Warranty
en – Original Instructions
10 Installation, Operation and Maintenance Manual
2.3 Unit handling
WARNING: Electrical hazard
Holding the unit by the
supply cord is strictly forbidden.
WARNING:
During
handling, make sure to avoid injury to people and animals, and/or damage to property.
2.4 Storage
Storage of the packed unit
The unit must be stored:
• In a covered and dry place
• Away from heat sources
• Protected from dirt
• Protected from vibrations
• At an ambient temperature between -40 °F and 185 °F (-40 °C and 85 °C), and relative
humidity between 5 % and 95 %.
NOTICE:
Do not place heavy loads on top of the unit.
NOTICE:
Protect the unit from collisions.