Instructions / Assembly
Table Of Contents
- 1 Introduction and Safety
- 2 Handling and Storage
- 3 Technical Description
- 4 Installation
- 5 Use and Operation
- 5.1 Precautions
- 5.2 Before starting
- 5.3 First starting
- 5.4 Air purge
- 5.5 Setting the timer
- 5.6 Operation modes
- 5.6.1 Fix speed models
- 5.6.2 Variable speed models
- 5.6.3 Fix speed models with fix value temperature control
- 5.6.4 Fix speed models with variable value temperature control
- 5.6.5 Autocirc pumps
- 5.6.6 LED light
- 5.6.7 Motor protection from overtemperature
- 5.6.8 Dry run protection
- 5.6.9 Power Down Reset (PDR)
- 5.6.10 Temperature sensor error mode
- 6 Maintenance
- 7 Troubleshooting
- 8 Technical Information
- 9 Disposal
- 10 Warranty
en – Original Instructions
Installation, Operation and Maintenance Manual 5
Danger levels
Hazard level
Indication
DANGER:
It identifies a dangerous situation which, if not
avoided, causes serious injury, or even death.
WARNING:
It identifies a dangerous situation which, if not
avoided, may cause serious injury, or even
death.
CAUTION:
It identifies a dangerous situation which, if not
avoided, may cause small or medium level
injuries.
NOTICE:
It identifies a situation which, if not avoided,
may cause damage to property but not to
people.
Complementary symbols
Symbol
Description
Electrical hazard
Hot surface hazard
Danger, system pressurized
Do not use flammable liquids
Do not use corrosive liquids
For indoor use only
Protect the unit against freezing
For indoor use only
Protect the unit against water dripping
For indoor use only
Protect the unit against direct sunlight