Spec Sheet

PAGE 2
Wastewater
Goulds Water Technology
PERFORMANCE RATINGS
APPLICATIONS
Specically designed for the following uses:
• Efuent systems
• Homes
• Farms
• Heavy duty sump
• Water transfer
• Dewatering
SPECIFICATIONS
• Solids handling capability: ¾" maximum.
• Capacities: up to 60 GPM.
• Total heads: up to 31 feet.
• Discharge size: 1½" NPT.
• Mechanical seal: carbon-rotary/ceramic-stationary,
BUNA-N elastomers.
• Temperature:
104º F (40º C) continuous
140º F (60º C) intermittent.
• Class B Insulation
• Fasteners: 300 series stainless steel.
• Capable of running dry with out damage to
components.
Motor:
• EP04 Single phase: 0.4 HP, 115 or 230 V, 60 Hz, 1550
RPM, built in overload with automatic reset.
• EP05 Single phase: 0.5 HP, 115 V or 230V, 60 Hz,
1550 RPM, built in overload with automatic reset.
• Power cord: 10 foot standard length, 16/3 SJTW
with three prong grounding plug. Optional 20 foot
length, 16/3 SJTW with three prong grounding plug
(standard on EP05).
• Fully submerged in high grade turbine oil for
lubrication and efcient heat transfer.
Available for automatic and manual operation.
Automatic models include Mechanical Float Switch
assembled and preset at the factory.
Tested to UL 778 and CSA 22.2 108 Standards
By Canadian Standards Association
File #LR38549
CU
S
®
FEATURES
EP04 Impeller: Thermoplastic semi-open design
with pump out vanes for mechanical seal protec-
tion.
EP05 Impeller: Thermoplastic enclosed design for
improved performance.
Casing and Base: Rugged thermoplastic design
provides superior strength and corrosion resis-
tance.
Motor Housing: Cast iron for efcient heat transfer,
strength, and durability.
Motor Cover: Thermoplastic cover with integral
handle and oat switch attachment points.
Power Cable: Severe duty rated oil and water resis-
tant.
Bearings: Upper and lower heavy duty ball bearing
construction.
AGENCY LISTINGS
Total Head
(ft. of water)
Gallons Per Minute
EP04 EP05
5 53 –
10 46 62
15 36 55
20 21 46
25 0 33
30 – 11