Spec Sheet

ManualsBrandsGoulds ManualsPrimaryGSP Series - 1/2 HP Cast Iron Sump/ Effluent Pump w/ LevelGuard? Switch

PAGE 2

Wastewater

Goulds Water Technology

APPLICATIONS

Specially designed for the following uses:

• Basement draining

• Water transfer

• Dewatering

• Filtered efuent

SPECIFICATIONS

• Discharge size: 1

⁄2" NPT

• Capacities: to 43 gpm

• Maximum head: 22 foot TDH

• Maximum solids handling: ½" spherical

• Impeller: vortex

• Temperature: 130º F (54º C)

• Mechanical seal: Silicon Carbide/Carbon/BUNA

MOTOR

•

hp, 115V, 60 Hz, single phase, 10 amps maximum,

1550 rpm

• ½ hp, 115V, 60 Hz, single phase, 8 amps maximum,

1550 rpm

• Automatic vertical oat, manual oat switch option

• Built-in thermal overload protection

• Oil lled design

•

hp power cord: 9 foot standard length with

NEMA 5-15P plug (models also available with 25-

foot power cord)

• ½ hp power cord: 15 foot standard length with

NEMA 5-15P plug

FEATURES

• Reliable mechanical switch coupled with solid oat

for dependable performance

• Oil-cooled motor permanently lubricated for

extended service life and is powered for continuous

operation

• Premium mechanical seal design provides superior

protection against sand and abrasive damage

(Silicon Carbide/Carbon/BUNA)

• Vortex impeller can handle solids up to ½" in size

and resist clogging better than a traditional two-

vane impeller

• Cast iron motor housing for optimal heat dissipation

AGENCY LISTINGS

Tested to UL778 CAN 22.2 by

CSA International (Canadian Standards Association)

USC

• Corrosion resistant hardware for lifetime use

• Cast iron suction strainer encompasses entire base-

designed to reduce debris entry (available on 0511

models)

• Built-in vent hole prevents air-binding with no added

labor

• Upper and lower sleeve bearings

• Heavy duty, portable and compact unit

• Approved for Residential use (CSA/CUS Listed)

• Two year warranty