Product Manual

www.LevelGuardProducts.com | 5
Sump Pump Switch
Electronic Sump Pump Switch
®
®
®
®
®
Fluid Control Products
Application
NOTICE: Because the LevelGuard
®
Sewage Pump Switch works in combination
with another manufacturer’s pump, you must read and follow the manufacturer’s
instructions for that pump. Failure to do so may void the warranty or cause product
damage.
• The LevelGuard® Sewage Pump Switch is designed to work as a water-detecting switch for
sump pumps made by other manufacturers.
• Any connected sewage pump must operate within the “Performance Specications” listed
below. Improper use, modication, or installation of this device may cause damage to the
product and surrounding equipment.
• The LevelGuard® Sewage Pump Switch Includes thermal protection designed to prevent
burnouts due to electrical overload.
• The LevelGuard® Sewage Pump Switch Includes fused over-current protection to safe-
guard users from pump failure modes resulting in high electrical current.
• LevelGuard® Sewage Pump Switches are designed for residential use only.
• The LevelGuard® Sewage Pump Switch IS NOT DESIGNED to work in caustic chemical
uids or solutions. DO NOT use for detecting oil, alcohol, or petrochemical solutions. Not
warranted to function in mixtures containing heavy foreign materials.
• It is strongly recommended that an alternative system be used in conjunction with the
LevelGuard® Sewage Pump Switch to protect against power outages, excessive water ow,
GFCI tripping, and primary pump failure.
Performance Specications
For use ONLY with 120-VAC, 60Hz, single-phase current only. Do not use with
240VAC systems.
Current Draw While in Operation 1.3 mA
Circuit Requirement 20 A dedicated branch circuit
Load Current Rating Motor: 1/2 hp (9.8 FLA, 58.8 LRA), 120VAC
General Electrical Load: 12 A, 120 A
Pilot Duty Load: 72 VA, 120 VAC
Sensor Technology Solid-State "Field-Eect"
Construction
Housing Material Plastic
Cord SJ0W/14 Gauge. Includes piggyback female
plug to receive cord from (and switch power to)
sump pump
Cable Length 15 feet
Water Level turn on/ turn o range approx. 10" (254 mm) typical dierential,
non-adjustable.
Environmental
Ambient Operating Temperature: 0°C to 50°C
Storage Temperature -40°C to 85°C
Ambient Liquid Operating
Temperature
0°C to 50°C
Certications
UL E332036, CUL E332036
RoHS Compliant.