Product Manual

www.LevelGuardProducts.com | 7
Sump Pump Switch
Electronic Sump Pump Switch
®
®
®
®
®
Fluid Control Products
Remove Existing Switch-01
Disconnect and Discard
UNPLUG
Remove Existing Switch (optional; not required for new
installations using pumps which do not include switch function)
DANGER: Conrm that electrical power is disconnected from all circuits near the
sewage pump. Contact a qualied electrician if necessary.
1. Shut o power to sewage pump circuit.
2. Unplug sewage pump and existing switch from outlet.
3. Remove sewage pump from sump pit (optional).
4. Remove retaining screw(s) to disconnect existing tethered switch. Discard old switch.
(Actual procedure may dier from illustration and is dependent on your pump make and model.)
5. Reinstall sewage pump into pit. Do not connect power cord.