Spec Sheet

FEATURES

Corrosion resistant construction

Cast iron body

Thermoplastic impeller and cover.

Upper sleeve and lower heavy duty ball bearing construction.

Motor is permanently lubricated for extended service life.

Powered for continuous operation.

All ratings are within the working limits of the motor.

Quick disconnect power cord, 20' standard length, heavy duty 16/3

SJTW with 115 or 230 volt grounding plug.

Complete unit is heavy duty, portable and compact.

Mechanical seal is carbon, ceramic, BUNA and stainless steel.

Stainless steel fasteners

SUBMERSIBLE EFFLUENT PUMP

TECHNICAL BROCHURE

BPE R1

PAGE 1
TECHNICAL BROCHURE BPE R1 FEATURES Corrosion resistant construction Cast iron body Thermoplastic impeller and cover. Upper sleeve and lower heavy duty ball bearing construction. Motor is permanently lubricated for extended service life. Powered for continuous operation. All ratings are within the working limits of the motor. Quick disconnect power cord, 20' standard length, heavy duty 16/3 SJTW with 115 or 230 volt grounding plug. Complete unit is heavy duty, portable and compact.
PAGE 2
Goulds Water Technology Wastewater APPLICATIONS MOTOR Specially designed for the following uses: General: • Mound Systems • Effluent/Dosing Systems • Low Pressure Pipe Systems • Basement Draining • Heavy Duty Sump/Dewatering • Single phase • 60 Hertz • 115 and 230 volts • Built-in thermal overload protection with automatic reset.
PAGE 3
Goulds Water Technology Wastewater METERS FEET 40 MODELS: PE31, PE41, PE51 HP: .33, .40, .
PAGE 4
DIMENSIONS (All dimensions are in inches. Do not use for construction purposes.) 6.4 6.4 12.1 12.1 2.2 2.2 12.0 12.0 11⁄2” NPT DISCHARGE 1½" NPT DISCHARGE 9.6 9.6 3.1 3.1 .6 .6 Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.gouldswatertechnology.com Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2016 Xylem Inc.