Operation Manual

14
For your health's sake
❐ The appliance can be affl icted by product residues. Clean it thoroughly before fi rst
use and after every use, in order to avoid health impairment. Please read the related
tips in the chapter "Cleaning and storage".
Correct installation and connection
❐ Only use and store the appliance out of reach of children. The power cable should be
out of reach of children. They could pull down the appliance with the cable.
❐ Only use the appliance in closed rooms.
❐ Always install the appliance with clear space on a dry, level and solid base.
❐ Maintain suffi cient clearance to heat sources e. g. hot plates or ovens, in order to
avoid damage to the appliance.
❐ Install the appliance in a position where neither the appliance, the power cable nor
the plug can drop into or get into contact with water or other liquids, in order to avoid
electrical shock.
❐ Never operate the appliance on a hob or in the vicinity of a gas source.
❐ Only connect the appliance to a correctly installed plug socket, equipped with a
ground fault interrupter. The plug socket must be accessible after connection. The
mains voltage must correspond to the technical specifi cations of the appliance. Only
use proper extension cables of which the technical specifi cations correspond to those
of the appliance.
❐ Ensure that the connected power cable does not pose a risk of tripping. Don't let the
cable hang over the edges of tables or kitchen counters. Someone might get caught
in the cable and pull the appliance down.
❐ Lay the cable so that it will not be squeezed or kinked and does not make contact
with any hot surfaces.
Proper use
❐ Check the appliance for damage before every use. The appliance must not be used
if the appliance, the power cable or the plug show any visible signs of damage. Don
not try to repair the appliance yourself or to replace the power cable or the plug. In
case of damage, immediately contact the customer service.
❐ Before every use check whether the appliance is clean and dry and has been assembled
correctly.
❐ Do not introduce any objects into the ventilation slots of the device and make sure
that no objects block the ventilation slots.
❐ The device should be used only when it is fully assembled. Always make sure that
the mixing bowl is correctly inserted and that the tilting mixer head is positioned
correctly in order to ensure that the device functions correctly.
❐ Do not switch on the device as long as the tilting mixer head is in an upright position.