User Manual

Installing Your Device
Before You Install
0 Unpack the box and check all items listed in the packing list.
8 Power on the strip light and check whether
it lights up.
Installing Steps
0 Wipe the surface
to make
sure it's clean and dry.
0
Peel off the protective film on
the control box and stick it
on.Place the control box close
to the music source to achieve
the best music effect.
8 Peel off the protective film
on the tape, stick the strip
on and press over
it firmly.
9 Power on the strip lights
and start using.
~
03