D V D + V C R C O M B O DV R 4 5 0 0 SSC.4500.
Congratulations... W E L C O M E ...on your purchase of this Go-Video DVD+VCR! We know you will enjoy this product for many years to come. In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the DVD+VCR): __________________________________ . CAUTION: To prevent fire, shock hazard, or annoying interference, use only the recommended accessories.
TA B L E Important Safety Instructions ............................................... iii 1 - GETTING STARTED 1 Unpacking ...................................................................... Basic Connections .......................................................... Auto Setup ..................................................................... Remote Control Setup .................................................... 1 2 3 4 O F 2 - QUICK TOUR 5 C O N T E N T S Remote Control ....................
APPENDIX A - ADVANCED CONNECTIONS 36 S-Video/Component Hookup ...................................... Alt Video Out Setting ................................................... A/V Receiver/Stereo Hookup ....................................... Dolby/DTS Decoder Setting ........................................ Other A/V Hookup ....................................................... Cable Box Hookup ....................................................... Alternative Cable Box Hookup ............................
READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. R E TA I N I N S T R U C T I O N S The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and maintenance instructions should be followed. CLEANING Unplug this video unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below. spillage occur, unplug unit and have it checked by a technician before use.
1 G E T T I N G S TA R T E D This Chapter will guide you through initial setup of your DVD+VCR, including basic connections and Auto Setup. 1 POWER As you unpack, please check that the following items are included in your DVD+VCR packing case: OPEN/CLOSE TRK– 1 AUTO TRK+ 2 3 SHUTTLE 4 5 6 ANGLE ZOOM 7 8 9 3D SOUND TV/VCR 0 100+ DVD SELECT VCR TV VIEW TV • DVD+VCR LCV VOL CH INPUT REC U N PA C K Y O U R DVD+VCR MENU/CLEAR • Warranty Registration Card SKIP/F.
C O N N E C T I O N S Follow these steps to connect the DVD+VCR to your television and antenna/cable TV. From Antenna or Cable TV To Television B A S I C 1 To Line Inputs on your Television (Optional) CONNECT ANTENNA/CABLE TV 3 Connect the RF coaxial cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD+VCR.
POWER 1 press 2 English Français Español If you have not already done so, make sure you have connected an antenna or basic cable to the “IN (FROM ANT.)” jack on the DVD+VCR back panel. Press SETUP/ENTER to continue. Select = 1-3 Choisir = 1-3 Elegir = 1-3 press 1 2 or CONFIRM ANTENNA/CABLE CONNECTION 3 3 S E T U P The first time you turn on your DVD+VCR, you will be prompted to set the menu language. Press 1 for English, 2 for French or 3 for Spanish.
S E T U P C O N T R O L Follow these steps to program the remote control to operate many brands of television. 1 POWER AUTO TRK+ 1 2 3 2 4 5 6 ANGLE ZOOM 7 8 9 3D SOUND TV/VCR 0 100+ DVD SELECT VCR ENTER CODE Press and hold the TV key on the DVD+VCR remote control while entering the 2-digit code for your brand of television with the 0-9 keys (see table below). If there is more than one code for your brand of television, try them all until one works.
2 Q U I C K T O U R This Chapter provides an overview of the DVD+VCR remote control, front panel, front panel display and rear panel. POWER OPEN/CLOSE TRK– 1 AUTO TRK+ 2 3 POWER Press to power the DVD+VCR on and off. DVD Press to set the remote control to operate the DVD deck. SHUTTLE 4 5 6 ANGLE VCR Press to set the remote control to operate the VCR deck.
POWER 0-9 Press to select specific disc menu items. ANGLE While a DVD is playing, press to view the same scene from different angles (not available on all DVDs). ZOOM While a DVD is playing, press to zoom in at 2 or 4 times the normal magnification. 3D SOUND While a DVD is playing, press to create the illusion of surround sound with only 2 speakers. SKIP/SEARCH BACK While a DVD is playing, press once to return to the previous track. Press and hold to search in reverse.
OPEN/CLOSE Press to eject the VHS tape from the VCR deck. POWER SHUTTLE << >> While a tape is playing, press SHUTTLE >> to gradually increase the cue speed (visual search forward). Press << SHUTTLE to slow down the tape, pause, then gradually increase the review speed (visual search in reverse). REWIND While a tape is stopped, press to rewind the tape. While a tape is playing, press to review the tape (visual search in reverse).
PA N E L F R O N T The following is an overview of the DVD+VCR front panel. 1 6 1 2 7 8 9 10 11 DVD DECK 3 13 12 8 Deck used for DVD/CD playback and other DVD functions. 2 3 Press to open and close the DVD disc drawer. 9 VCR DECK 10 DVD - SKIP/SEARCH FORWARD RECORD Press to start recording in the VCR deck. Press repeatedly to add recording time in 30-minute increments (see page 22). 5 VCR EJECT Press to eject the VHS tape from the VCR deck.
F L A P The following is an overview of the keys and inputs located behind the front panel flap door. D O O R 1 1 2 3 4 5 COPY Press to copy a DVD in the DVD deck to a VHS tape in the VCR deck. Note: The DVD+VCR will not copy Macrovision® encoded DVDs. 2 5 6 7 SETUP TV/VCR Press to switch back and forth between your television’s tuner and the DVD+VCR’s internal tuner.
D I S P L AY PA N E L F R O N T The following is an overview of the DVD+VCR front panel display. 1 2 3 4 5 12 13 14 15 16 17 7 8 9 10 18 19 11 20 When the specified indicator is lit on the front panel display, it means that: 1 DVD DECK INDICATOR The DVD deck is active. 2 DISC TYPE INDICATOR A DVD, CD, VCD or SVCD is loaded. 3 4 LPCM INDICATOR DTS INDICATOR DECK STATUS INDICATOR STEREO INDICATOR HI-FI INDICATOR The Hi-Fi track of a VHS tape is playing.
R E A R The following is an overview of the DVD+VCR rear panel. 1 PA N E L 2 1 3 4 5 6 RF ANTENNA INPUT 7 8 7 RF OUT TO TV Connect to your television with an RF coaxial cable. 3 4 5 COMPONENT VIDEO OUT S-VIDEO OUT Connect to your television with an S-Video cable. For audio, use the Line Out or Digital Audio Out (optical or coaxial). LINE 2 INPUT DIGITAL AUDIO OUT (OPTICAL) Connect from the outputs of an external audio/video device.
P L AY B A C K 3 B A S I C O P E R AT I O N S This Chapter shows you how to play DVDs and videotapes with your DVD+VCR. You will also learn how to navigate in the DVD+VCR menu system. Follow these steps to play a DVD. POWER OPEN/CLOSE TRK– 1 AUTO TRK+ 2 3 2 5 6 ANGLE 7 8 INSERT DISC Place the disc in the drawer with the label side facing up. If the disc has two sides, orient the disc with the desired label facing up.
POWER OPEN/CLOSE TRK– 1 AUTO TRK+ 2 3 1 INSERT VHS TAPE Insert a standard VHS videotape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape. B A S I C Follow these steps to play a VHS tape. SHUTTLE 5 6 2 ZOOM 7 8 Press PLAY/PAUSE 9 3D SOUND DVD SELECT VCR TV LCV VOL CH 3 INPUT REC MENU/CLEAR MODE/REPEAT TITLE SP/SLP SKIP/F.ADV CLO CK/C O U NTER SUBTITLE AUDIO • To freeze playback, press PLAY/PAUSE .
N A V I G AT I O N The following keys are used to open and navigate through the DVD+VCR on-screen menu system. SETUP/ENTER KEY POWER OPEN/CLOSE TRK– AUTO TRK+ 1 2 3 4 5 6 ANGLE Moves pointer up the list of menu items. ZOOM 7 Press to access the DVD+VCR on-screen menu system. U P A R R O W K E Y ( D I S P L AY ) SHUTTLE 8 9 3D SOUND TV/VCR DOWN ARROW KEY (CLOCK/ COUNTER) 0 100+ DVD SELECT VCR TV Moves pointer down the list of menu items.
4 S P E C I A L D V D F E AT U R E S This Chapter explains some of the special features of DVD/CD/VCD playback. press DISPLAY 1 V I E W D V D / C D D I S P L AY Press DISPLAY during DVD/CD playback. 2 SELECT TITLE, CHAPTER OR TIME T i t l e o r Tr a c k Use the LEFT/RIGHT arrow keys to select “Title” or “Track” then use the UP/DOWN arrow keys to select from all available titles/ tracks on the disc. Select “Title” Press SETUP/ENTER to jump to the desired title/track.
A N G L E / Z O O M Follow these instructions to view a DVD movie from multiple angles, or to zoom in during playback. ANGLE press 7 ANGLE Some DVDs allow you to view the same scene from different perspectives, or angles, while watching a movie. Press ANGLE during DVD playback to activate this feature. 1 If multiple Angles are available on the DVD, the Angle mark will appear on the front panel display during playback. 2 Press ANGLE to view the Angle Selection menu.
SUBTITLES Many DVDs provide subtitles in one or more languages. The SUBTITLE key provides a shortcut to view and select from all available subtitle languages on the disc. 1 While playing a DVD, press SUBTITLE. 2 Use the UP/DOWN arrow keys to select from the available subtitle languages. 3 Use the LEFT/RIGHT arrow keys to turn the selected subtitle language on or off. 4 Press SETUP/ENTER to confirm your selection.
MODE/REPEAT press R E P E AT C H A P T E R / T I T L E You can repeat a single chapter or track over and over, or you can repeat a complete title of a DVD. 1 While playing a DVD or CD, press MODE/REPEAT. On the Repeat menu, the current Repeat Mode will blink. 2 Use the LEFT/RIGHT arrow keys to select Chapter/Track or Title. 3 Press SETUP/ENTER to repeat the current chapter/track or title.
MARK press SET BOOKMARKS 1 While a DVD is playing, press MARK. The “Mark” header will appear on the screen. 2 Use the LEFT/RIGHT arrow keys to select one of the three bookmark placeholders (- - -). The selected placeholder will blink. 3 When the DVD is at the scene you want to bookmark, press SETUP/ENTER. The placeholder will change to a number (1, 2 or 3). B O O K M A R K S You can insert up to three Bookmarks on your DVDs, so you can jump quickly to your favorite scene or song.
R A N D O M P L AY B A C K press MODE/REPEAT P L AY B A C K R A N D O M / P R O G R A M M E D 20 Follow these steps to program playback of a DVD or CD in a random or preset order. with TV View set to DVD Random Playback sets a random order for playback of chapters/tracks on a DVD or CD. 1 While a DVD/CD is stopped, press MODE/REPEAT. 2 Use the UP/DOWN arrow keys to move the pointer to “Random Play,” then press the RIGHT arrow key to select. The disc will begin playback automatically in random order.
1 M P 3 Follow these steps to playback MP3 files burned on a CD-R disc. INSERT CD-R • The MP3 menu will appear after a few seconds and the first song on the disc will begin playing 2 SELECT FOLDER Use the UP/DOWN arrow keys to select the folder on the CD-R which contains the MP3 files you want to hear, then press SETUP/ ENTER. • If there are more than 8 folders on the disc, use the LEFT/RIGHT arrow keys to view additional folders. 3 P L AY B A C K Insert a CD-R with MP3 files into the DVD deck.
R E C O R D I N G 5 V C R R E C O R D I N G This Chapter will show you how to record television programs in the VCR deck and set recording preferences. Follow these steps to record a television show in the VCR deck. 1 Insert a VHS tape with a record safety tab into the VCR deck. 2 POWER AUTO TRK+ 1 2 3 • SP – Standard Play, for best quality. • SLP – Super Long Play, for maximum recording time (3 times longer than SP).
1 SETUP /ENTER press Press SETUP/ENTER. 2 SETUP MENU To Move Use the UP/DOWN arrow keys to move the pointer to “VCR & Channel Setup,” then press the RIGHT arrow key to select.
V H S F R O M D V D T O The DVD+VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. 1 Insert the disc you wish to copy in the DVD deck and close the drawer. 2 INSERT VHS TAPE Insert a VHS tape with a record safety tab into the VCR deck. 3 C O P Y I N G INSERT DISC COPY THE DVD TO VHS TAPE Press COPY on the DVD+VCR front panel. • The DVD will begin playing and the VCR will begin recording (see note below).
6 T I M E R R E C O R D I N G This chapter provides step by step instructions for programming Timer Recordings. 1 SETUP /ENTER press Insert a blank tape with a record safety tab into the VCR deck.
...continued 1 Su Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 We 1 8 15 22 29 Th 2 9 16 23 30 Fr 3 10 17 24 31 Ch10 0 press to set hours and minutes Su Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 1-Time We 1 8 15 22 29 Enter the hours as a 1-digit number; e.g., for one hour, press “1.” Set Length (M) Enter the minutes as a 2-digit number; e.g., for 30 minutes, press “30.
Press SETUP/ENTER to confirm the event and view a summary of all programmed events. • The event is now stored in memory and will record at the scheduled time. It is not necessary to turn the DVD+VCR off or put it into a “Timer” mode; the event will record regardless of the state of the DVD+VCR. • The “Timer” indicator will light on the front panel display.
C H A N N E L M A P P I N G 7 V C R P L U S + This chapter provides step by step instructions for setting up and programming VCR Plus+ recordings, a patented and simplified method of timer recording. Follow these steps to match your local channels to the VCR Plus+ preassigned channels. This process is know as “Channel Mapping” and must be done before you can begin using VCR Plus+. press 1 SETUP /ENTER Press SETUP/ENTER.
BROADCAST VCR Plus+ Your Local Network Channel Network Channel Channel 14 17 33 34 35 37 38 39 41 42 43 44 45 46 47 48 49 51 52 53 54 55 57 58 62 63 72 80 83 86 88 89 90 91 92 93 94 95 96 97 98 99 ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ __
R E C O R D I N G Follow these steps to program a VCR Plus+ recording. You will need a local TV listing that includes VCR PlusCode numbers. press 2 Enter Code [ with (0-9) P L U S + • To correct your entry, press MENU/CLEAR. • Press VCR PLUS+ to continue. 9 3 ] • To set how often the event will record and/ or to adjust the recording speed, continue with Step 4 below.
2 - Mo-Fr ...continued 1 Aug The event will be recorded weekdays only (Monday through Friday). SET SPEED [1-3] : 1 2001 10:30PM Su Mo Tu 5 12 19 26 6 13 20 27 7 14 21 28 1-Time We 1 8 15 22 29 Th 2 9 16 23 30 Ch10 1H00M Fr 3 10 17 24 31 3 - We e k l y Sa 4 11 18 25 The event will be recorded once a week. 4 - Always The event will be recorded every day. Auto 7 press 1 2 3 4 1 3 Press the RIGHT arrow key repeatedly until “Set Speed” appears in the menu header.
E X T E N D T I M E R P L U S + V C R Follow these steps to extend VCR Plus+ recording a few minutes before and after the scheduled event. This will help to ensure that the entire event is recorded. press 2 Set Timer Recording Child Lock Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / To Move RETURN to Quit OPEN “SETUP MENU” Press SETUP/ENTER.
8 S E A R C H / I N D E X This Chapter will show you how to locate recordings on your VHS tapes using Index Marks. What are Index Marks? POWER OPEN/CLOSE TRK– 1 AUTO TRK+ 2 3 SHUTTLE 4 5 6 ZOOM 7 8 9 3D SOUND Automatic Index Marks TV/VCR 0 100+ DVD SELECT VCR TV VIEW TV LCV VOL CH INPUT Manual Index Marks MENU/CLEAR SKIP/F.ADV MODE/REPEAT DISPL AY SETUP /ENTER CLO You can place an Index Mark manually any time a tape is recording by pressing SEARCH/INDEX.
S E A R C H / S C A N I N D E X Follow these steps to locate recordings by scanning or searching for Index Marks. 1 press SEARCH/INDEX Insert a videotape in the VCR deck. SEARCH MENU 2 Index Search/Scan Blank Search Direct Time Search Return to 0:00:00 To Move Select “Index Search/Scan” 4 INDEX MENU Index: - - SEARCH/SCAN FOR INDEX MARKS Scan Press FAST-FORWARD or REWIND to begin scanning for all Index Marks forwards or backwards.
press 1 SEARCH/INDEX Insert a VHS tape in the VCR deck. 2 SEARCH MENU Index Search/Scan Blank Search Direct Time Search Return to 0:00:00 To Select RETURN to Quit Select “Blank Search,” “Direct Time Search,” & “Return to 0:00:00” TIME SEARCH Enter Counter Value Enter [1] = Pos Or [2] = Neg P r e s s C L E A R To C o r r e c t MENU TO Quit Use the UP/DOWN/RIGHT arrow keys to select from the following: Blank Search Searches for the next available blank (unrecorded) segment on your tape.
APPENDIX HOOKUP A A D VA N C E D C O N N E C T I O N S This Chapter will show you how to use the S-Video and Component Video outputs, as well as how to connect additional audio/video devices to your DVD+VCR. Follow these steps to connect the DVD+VCR to your TV using the S-Video or Component Video outputs. 1 CONNECT S-VIDEO OUT TO TV Connect an S-Video cable from the S-Video Output on the back panel of the DVD+VCR to the S-Video Input on your television.
1 SETUP /ENTER press To Move Off 2 Use the UP/DOWN arrow keys to move the pointer to “DVD Setup,” then press the RIGHT arrow key to select. To Select 3 Use the UP/DOWN arrow keys to move the pointer to “Alt Video Out,” then press the RIGHT arrow key to select from the following: DVD SETUP / To Move RETURN to Quit 4:3PS Off [None] Auto Low Off To Select Off Component S-Video Indicates that you are using the standard RF or Line Out jacks to connect your DVD+VCR to your TV or display device.
H O O K U P R E C E I V E R / S T E R E O A / V Follow these steps to connect your DVD+VCR to an A/V receiver or stereo system using the Line Out or Digital Audio Out jacks. Connect to Stereo Line Inputs OR Connect to the Digital Audio Input of an A/V Receiver with a Dolby Digital and/or DTS Decoder.
D O L B Y / D T S If you connected the DVD+VCR to your A/V receiver with the Optical or Coaxial Digital Audio Out AND your A/V receiver is equipped with a Dolby Digital or DTS Decoder, you must enable the correct digital output in the menu system. ENTER /SETUP press 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pressing SETUP/ENTER. You will not be able to enter the “DVD Setup” menu if a DVD is playing.
Front Panel From Audio/Video Outputs of External Device (Line 1) A / V H O O K U P Follow these steps to connect your DVD+VCR to an external audio/video component, such as a camcorder, video game, etc. O T H E R Rear Panel From Audio/Video Outputs of External Device (Line 2) 1 CONNECT DEVICE TO VCR Connect RCA cables from the audio/video outputs of your external device to the audio/video inputs on the front (Line 1) or rear (Line 2) of the DVD+VCR.
C A B L E Follow these instructions to connect a Cable Box to your DVD+VCR. Cable Box From Cable Wall Outlet Input Output B O X VHF/UHF 1 CONNECT CABLE TO CABLE BOX 6 Connect an RF coaxial cable from your cable wall outlet to the Input jack on the Cable Box. 2 CONNECT CABLE BOX TO DVD+VCR Set the CH (channel) switch on the back panel of the DVD+VCR to 3 or 4, whichever is NOT used by your cable box. 7 Connect a second RF coaxial cable from the Output jack on the Cable Box to the “IN (FROM ANT.
H O O K U P Follow these steps if you have a cable box and want to be able to watch a second channel while recording a TV program. B O X From Cable Wall Outlet To Cable Box Input C A B L E Cable Box Input 1 Output CONNECT CABLE TO TV TV VHF/UHF 4 A LT E R N AT I V E Connect an RF coaxial cable from the wall outlet to the “IN (FROM ANT.)” jack on the back panel of the DVD+VCR. Set the TV to channel 3 or 4, whichever is used by your cable box.
APPENDIX B S Y S T E M SETTINGS This Chapter will show you how to customize your DVD+VCR experience, with settings to adjust the language, time, channels, displays and more. SETUP /ENTER press 1 OPEN “SETUP MENU” Press SETUP/ENTER.
S E T T I N G S Follow these steps to turn Auto Clock Set on or off. You can also specify the time zone and the channel that Auto Clock Set uses to determine your local time. 1 SETUP /ENTER press Press SETUP/ENTER.
M A N U A L If Auto Clock Set is not available in your area, follow these steps to set the clock manually (see note below before proceeding). 1 SETUP /ENTER press Press SETUP/ENTER. 2 SETUP MENU Use the UP/DOWN arrow keys to move the pointer to “Set Clock,” then press the RIGHT arrow key to select. Off 3 RETURN to Quit 4 Select “Set Clock” Off Auto To Move 5 Use the 0-9 keys or the UP/DOWN arrow keys to set each of the following items.
T I M E Follow these steps to set Daylight Savings Time manually. You should only set “Daylight Savings” if Auto Clock Set has set the time incorrectly. 1 SETUP /ENTER press Press SETUP/ENTER.
1 SETUP /ENTER press Press SETUP/ENTER. 2 SETUP MENU Set Timer Recording Child Lock Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma Use the UP/DOWN arrow keys to move the pointer to “VCR & Channel Setup,” then press the RIGHT arrow key to select.
L O C K Follow these steps to lock the front panel to prevent children from tampering with the DVD+VCR. Child Lock disables all front panel keys so the DVD+VCR can be operated only with the remote control. press 1 SETUP /ENTER Press SETUP/ENTER.
press 1 SETUP /ENTER Press SETUP/ENTER. 2 Set Timer Recording Child Lock Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma To Move Use the UP/DOWN arrow keys to move the pointer to “VCR & Channel Setup,” then press the RIGHT arrow key to select. Off 3 Select “VCR & Channel Setup” • Both - Enables both Auto Play and Auto Rewind.
D I M M E R PA N E L F R O N T 50 Follow these steps to dim the front panel display. press 1 SETUP /ENTER Press SETUP/ENTER.
APPENDIX ADVANCED DVD SETUP C This Chapter presents advanced DVD setup options, including Aspect Ratio, Language Preferences, Dynamic Compression, Rating Control, Still Mode and Black Level. T V Follow these steps to set the TV Aspect Ratio so the DVD player will display movies at the appropriate size for your television. Press SETUP/ENTER. SETUP /ENTER press • Make sure the DVD deck is stopped before pressing SETUP/ENTER. You will not be able to enter the “DVD Setup” menu if a DVD is playing.
P R E F E R E N C E S Follow these steps to choose the default language for DVD audio soundtracks, subtitles and disc menus. 1 SETUP /ENTER press Press SETUP/ENTER. • Make sure the DVD deck is stopped before pressing SETUP/ENTER. You will not be able to enter the “DVD Setup” menu if a DVD is playing.
1 SETUP /ENTER press Press SETUP/ENTER. • Make sure the DVD deck is stopped before pressing SETUP/ENTER. You will not be able to enter the “DVD Setup” menu if a DVD is playing. SETUP MENU Set Timer Recording Child Lock Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma Off 2 Use the UP/DOWN arrow keys to move the pointer to “DVD Setup,” then press the RIGHT arrow key to select.
S E T T I N G S C O N T R O L Follow these directions to set up a Rating Control system to prohibit playback of certain DVD movies. 1 SETUP /ENTER press Press SETUP/ENTER. • Make sure the DVD deck is stopped before pressing SETUP/ENTER. You will not be able to enter the “DVD Setup” menu if a DVD is playing.
1 RATING CONTROL Require Password Change Password Change Rating Level From the “Rating Control” menu, use the UP/DOWN arrow keys move the pointer to “Change Password,” then press the RIGHT arrow key to select. Yes 2 / To Move To Select E N T E R N E W PA S S W O R D Use the 0-9 keys on the remote control to enter a new 4-digit password.
L E V E L Follow these instructions to prohibit viewing of DVDs at or above a particular rating. 1 RATING CONTROL R AT I N G Require Password Change Password Change Rating Level / To Move Yes To Select From the “Rating Control” menu, use the UP/DOWN arrow keys move the pointer to “Change Rating Level,” then press the RIGHT arrow key to select.
1 SETUP /ENTER press Press SETUP/ENTER. To Move Off 2 Use the UP/DOWN arrow keys to select “DVD Setup,” then press the RIGHT arrow key to select.
APPENDIX T R O U B L E S H O O T I N G D H E L P This Chapter provides customer support information, as well as a list of FAQs, technical specifications, the product warranty and a special feature summary. The chart below will help you solve common challenges with your DVD+VCR. If you don’t find the answers you need here, you can contact our Customer Service Department as follows: Phone: (480) 922-0896 Office hours: Monday-Friday, 6:00 a.m. to 9:00 p.m. MST Saturday-Sunday, 8:00 a.m. to 4:00 p.m.
Remote not working. • Remove all obstacles and point directly at DVD+VCR. • Make sure batteries are fresh and properly installed. • Press DVD or VCR key. Note: If you press DVD key by accident, remote will only operate the DVD player. The same is true of the VCR key. On-screen display shows “Error.” • Turn power off, then turn power on again. • Inspect tape/disc slots for foreign objects. VCR doesn’t work. • Unplug DVD+VCR for 10 seconds, then plug it in again.
S P E C I F I C AT I O N S The following are the technical specifications for your DVD+VCR. INPUTS AUDIO VIDEO RF OUTPUTS AUDIO 2 Stereo audio outputs, RCA Connector, -8dbm, 1.5kΩ VIDEO DVD+VCR: 1 Composite video output, RCA Connector, 75Ω, 1Vp-p DVD only: 1 S-Video output, S-Connector, 75Ω, Y = 1.0Vp-p, C = 0.286Vp-p DVD only: 1 Component video output, 75Ω, Y = 1.0Vp-p, Pb = 0.7Vp-p, Pr = 0.
During the warranty period, the Go-Video Warranty Administrator will honor DVD+VCR service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. The DVD+VCR remote control is warranted for 90 days from the date of purchase. Who is Protected This warranty protects the original consumer owner of this Go-Video product.
S U M M A R Y F E AT U R E Enjoy the following features of your DVD+VCR.
0-9 5, 6 100+ 5 16:9 Widescreen 51 3D Sound 6, 10, 17 4:3 Letterbox 51 4:3 Pan and Scan 51 A A-B Repeat 18 A/V Receiver 38 Add/Remove Channel 47 Alt Video Out 37 AM/PM 10, 45 Angle 6, 10, 16 Audio 6, 17, 38, 52 Auto Channel Search 3, 47 Auto Clock Set 3, 44 Auto Play 49 Auto Rewind 49 Auto Setup 3 Auto Show Finder 34 B Batteries, Insert 1 Black Level 57 Blank Search 35 Bookmarks 19 C Cable Box Record Source 26 Channel +/– keys 9 Settings 47 Switch 11 Channel Mapping 28 Chapter Indicator 10 Selecting 15 C
O One-Touch Recording 22 Open/Close key 6, 7, 8 OTR 22 OTR Loop Record 22 Overlapping Events 27 P Password 55, 56 Play/Pause key 6, 7, 8 Playback DVD 12 VCR 13 PlusCode 2, 28, 30 Power key 5, 8 Programmed Playback 20 R Random Playback 20 Rating Control 54 Rating Level 56 Rear Panel 11 Record key 7, 8 Record Safety Tab 25 Record Settings 23 Record Source 23, 26 Record Speed 22, 26, 31 Record Speed indicator 10 Recording, Basic 22 Remote Control 5 Setup 4 Remove Channel 47 Repeat 13 Repeat Chapter/Title 18
1 Ch10 Fr 3 10 17 24 30 Auto Sa 4 11 18 25 31 5 13 6 14 7 8 9 15 16 RETURN to Continue Please review the events from the Select Event menu and remove on using the CLEAR key 1 2 3 4 10 11 12 TIMER EVENTS OVERLAP 1-Time Th 2 9 16 23 29 SET MONTH [1-12] :08 2001 10:30PM 1H00M Su Mo Tu We 1 5 6 7 8 12 13 14 15 19 20 21 22 26 27 28 Aug 7 14 21 27 5 12 19 26 To Set 6 13 20 Tu We 1 8 15 22 28 / Fr 3 10 17 24 30 Sa 4 11 18 25 31 On Auto Auto Auto / Original More...
Thank you for purchasing this Go-Video DVD+VCR! Sensory Science specializes in developing and marketing innovative digital entertainment products, including digital televisions, Internet media players, DVD players, and high-end home theater components for the digital living room. We take pride in our ability to deliver unparalleled customer support, and are honored to have received the prestigious Inside Track award for Supplier Loyalty two years running.
