User Manual

1. This section contains important safety and operating

instructions. Read and keep this user manual for future

reference.

2. Do not expose the Pure sine inverter to rain, snow, or

spray water. To reduce the risk of fire hazard, do not

cover or obstruct the ventilation openings. Do not install

the Pure sine inverter in a zero-clearance

compartment. Overheating may result.

3. To avoid a risk of fire and electric shock, make sure the

existing wiring is in good condition and is not

undersized. Do not operate the PURE SINE with

damaged or substandard wiring.

4. Do not disassemble the Pure sine inverter. It contains no

user-serviceable parts. See the WARRANTY section for

instructions or obtaining service. Attempting to service

the Pure sine inverter yourself may result in a risk

of electrical shock or fire. Internal capacitors remain

charged after all power is disconnected.

5. To reduce the risk of electrical shock, disconnect

both AC and DC power from the Pure sine before

attempting any maintenance, cleaning, or working on

any circuits connected to the Pure sine inverter.

Turning off controls alone will not reduce this risk.

IMPORTANT SAFETY INSTRUCTIONS