Use and Care Manual

18
E01
Contact GoWise USA
customer support.
Contact GoWise USA
customer support.
Temperature sensor
disconnected.
E02 Temperature sensor has
short circulted.
Displays E03 as soon
as power cord is
plugged in.
Temperture at the bottom
of the cooking pot is too
high. Power board is burned.
Replace power board.
Displays E03 in the
middle of cooking
process.
Food burned or stuck on the
bottom of the pot; heat
cannot transmit.
Clean the sticky or
burned food o
the pot. Note: Do not
scrub too hard as it may
damage the pot.
Displays E04 as soon
as power cord is
plugged in.
Loose connection of the
exterior power cord.
Plug in the exterior
power cord again to
ensure both
connections with the
cooker and with the
outlet are tight.
Displays E04 as soon
as power cord is
plugged in.
Loose connection of the
interior red wire.
Contact GoWise USA
customer support
Contact GoWise USA
customer support
Contact GoWise USA
customer support
Displays E04 as soon
as power cord is
plugged in.
The pressure switch is
disconnected.
Displays E04 after
pressure cooking starts.
Signal switch has loose
connection.