Use and Care Manual

18
ROTISSERIE ROAST A WHOLE CHICKEN
Using the Rotisserie Rod to Roast
a Whole Chicken
1. After the chicken is trussed,
carefully maneuver the Rotisserie
Rod through the chicken from the
neck to the legs.
2. Slide the Rotisserie Forks on
both sides of the Rotisserie Rod
piercing the chicken; making sure
to secure the chicken in place.
3. Using the Thumb Bolts, lightly
tighten the Rotisserie Forks into
place – Do not over tighten as
removing Rotisserie Forks may
become difficult after cooking.
4. Open the door. Insert one end
of the Rotisserie Rod into the
Rotisserie Socket first then,
set the opposite end into the
Rotisserie slot. Do not force the
rod into the socket, rotate until
the rod slips in easily.
5. Turn the Unit on by pressing
POWER botton and select the
Roast Chicken Preset by cycling
through MENU.
6. Press ROTISSERIE botton on
the Digital Display to engage the
rotation functionality of the unit.
7. The default cooking temperature
and time for Rotisserie is 400°F
for 35 min – if the chicken is not
golden brown and crispy and the
internal temperature is not 165°F,
repeat the cooking cycle.
8. When the chicken is done cooking
with the internal temperature of
165°F, remove the chicken using
the Rotisserie Tong.
a. Open the door.
b. While using oven mitts
on both hands and using
the Rotisserie Tong, hook the
bottom left and right sides
of the Rotisserie Rod, in the
gaps of the rod and carefully
lift the rod out of the resting
slot on the right side of the
compartment – carefully pull
the rod out of the Rotisserie
socket and remove from the
air fr yer.
NOTE: Contents will be hot and can
easily burn – use caution not to let
scalding meat juices or oils from
falling on the skin by holding a catch
tray or plate under the rotisserie
contents.