Use and Care Manual

PS1002, PS1003, PS1004, & PS1005

1. Check the output voltage and capacity of the battery. It

should comply with the requirement of the product used.

2. Connect the battery and the DC cable of the inverter.

Ensure that the polarities are not reversed and are in

good contact.

3. Press and hold the power switch on the inverter or the

remote control box for at least 5 seconds. The power

indicator on the inverter and remote control box should

be on (this will avoid interference).

4. Turn off electrical appliance and insert the electrical

appliance plug to the AC output socket of the inverter.

Turn on the appliance for use.

5. The inverter’s cooling fan will start running when the

case temperature reaches about 100°F.

6. When the inverter is not in use, turn the inverter off by

pressing the power switch on the inverter or remote

control box. The power indicator light should be off. This

will conserve the battery power.

USING THE INVERTER (CONTINUED)