IMPORTANT INFORMATION To ensure the optimal operation of your camera, please note the following important information: MicroSD card • Please ensure your memory card is formatted in the camera before using the card for the first time (Settings > Format). Before formatting, make sure that all the files in your memory card have been backed up as formatted and erased files can not be restored. • The maximum capacity memory card supported is 64GB.
Charging • Ensure the camera is charged completely before first use. • Keep the device away from children while charging. • Ensure the camera is switched off when charging. If the camera turns on automatically when connected to a power source please turn it off to complete charging. A camera plugged into power and switched on will not charge. • The camera should only be charged via the USB port of a computer or a USB power adapter with a maximum capacity of 1100mAh.
Safety instructions WARNING: The camera is not suitable for children under 36 months because of choking hazard. WARNING: Always protect your camera from falls, blows and bumps. • Keep a sufficient distance from objects that generate strong magnetic fields or radio waves, such as electrical appliances to prevent them from damaging the product or affecting the sound and image quality.
CAMERA DESCRIPTION Shutter / Select Button Power / Mode Button Lens Microphone
Indicator light Shutter/ Select Button Power/ Mode Button Speaker Touch screen Micro SD Card Slot Battery Cover Press and hold the button on the cover. Then slide the cover to open.
CAMERA OPERATION Installing and removing battery 1. Correctly install the battery into the camera as suggested by the ‘pins’ in the battery compartment and ‘slots’ in the battery itself. 2. For battery power: Please refer to the symbol: Full power mode “ ” low power mode “ ”. 3. Remove battery: Open the battery compartment cover and remove the battery by pulling on the tag attached.
Power on/off Press and hold power button for 3-5 seconds to turn the camera on/off. Video and Photo mode switching There are 2 options to switch between video and photo modes: 1. To select your video or photo mode, short press the power/mode button. Tap your preferred mode to enter. 2. Swipe up on the touchscreen to show the mode selection. Tap your preferred mode to enter or tap ‘X’ to return.
Video/Photo General Settings Menu While in either video or photo standby mode, click setup icon video/photo settings interface.
Video Mode After the camera is powered on, the camera's default mode is video standby mode. The last used video function mode will also be active. Tapping the video settings button will allow you to change the current resolution and other video settings. Pressing the "shutter / select" button starts the video recording. While recording, the status indicator LED flashes blue. Press the shutter button again to stop the video recording.
Slow Motion Enter the function mode menu and tap the "Slow Motion" mode icon. When selected, the camera will return to the video preview screen automatically. Tap the “Settings” icon and tap the "Video Resolution" option to select the slow motion resolution. Photo Mode There are 2 options to enter the Photo Mode: 1. Touch operation: Swipe up to enter the function mode menu where you can choose your photo mode. 2. Button operation: Short press the Power / Mode button to enter the function mode menu.
Photo Burst Enter the function mode menu and tap the "Photo Burst" mode icon. When selected the camera will return to the Photo preview screen automatically. Click the “Settings” icon to enter the photo settings menu and tap "Burst Settings" to select the number of burst photos per shutter press. Control Shortcuts Swipe DOWN to display a control panel that allows you to easily turn on WiFi , lock the screen or turn off the camera.
WIFI Connection Before using the WIFI Control function, please install the YUTUPro APP on your smartphone or tablet. Please note that wireless transfer of files using the app is not possible for video with resolution higher than 1080p. Files using any resolution higher then 1080p can only be accessed via your computer using a card reader. Connection steps: Step 1. On the camera: • In the video / photo mode, swipe DOWN to enter the control shortcuts screen.
Step 2. On your smartphone/tablet: • Open the WiFi settings on your mobile phone to search for the camera device: Manta_xxxxxx from the available wireless networks. The password to complete the connection is 12345678. • Exit your WiFi settings menu on your smartphone and open the YUTUPRO APP. • Tap ‘Enter Camera’ on the app to connect your camera and smartphone.
Note: Should the camera crash for any reason, please reset the camera by removing and re-installing the battery. TECHNICAL SPECIFICATIONS Image Sensor LCD Display Focusing Exposure Type CMOS 12MP Effective Pixels Approx. 12 Mega Pixels 2.0”/ 5cm Touchscreen Fixed Programmed AE Auto, 100, 200, 400, 800, 1600 Type Control ISO 4K (3840x2160) 30fps Video resolution Audio 2.
Stabilization Minimizes small movements that traditional tech can’t detect. On/Off Memory HDMI OUT Image Size Field of view (FOV): Indicates the width of the field of view captured by the camera sensor. Scene Mode: Applies pre-set exposure modes that are optimized for specific scenes Metering: Captures better visuals more consistently by adjusting for light sensitivity from different sources.
Time-lapse Photo: The camera will take still pictures at designated intervals. Photo Timer / Self-timer: Sets a delay timer for selfie or group photos. ISO:Adjusts your camera’s level of sensitivity to available light. The lower the ISO the less sensitive, the higher the ISO the greater the sensitivity of the camera. Distortion Correction: Also known as fish eye adjustment. Mitigates the fish eye effect and adjusts wide-angle distortion. Image Rotate: Turns the screen will 180 degrees.
WiFi Frequency Interface Battery Dimensions (WxHxD) 2,4 GHZ USB TYPE C 3.
All product specifications are correct at time of print and are subject to change without prior notice. Easypix GmbH reserve the right for errors or omissions. For technical help please visit our support area on www.easypix.eu.
DISPOSAL Dispose of packaging For disposal, separate packaging into different types. Cardboard and board must be disposed of as paper and foil must be recycled. Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste.
Battery warning • Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do not expose battery being placed in high temperature environment, if battery leaks or bulges, stop continue to use. • Always charge using the charger. Risk of explosion if battery is replaced by an incorrect type. • Keep the battery out of reach of children. • Batteries may explode if exposed to naked fire. Never dispose of batteries in a fire. • Disposed of used batteries observing local regulations.