Data Sheet

Type
: Rechargeable Nickel Metal
Hydride Cylindrical Cell
Recycled material
content
Rechargeable Nickel Metal Hydride
Battery Made with Minimum 10%
Recycled materials
Nominal Dimension
(with Sleeve)
:
 = 10.5mm
H = 44.5mm
Applications
:
Recommended discharge current
95 to 2850mA
Nominal Voltage
: 1.2V
Capacity
:
Rated: 950mAh
Typical: 990mAh
When discharged at 190mA to
1.0V at 20℃
Charging Condition
: 95mA for 16 hrs at 20℃
Charging Retention
: 70% of rated capacity after cell storage
at 20℃ for 6 months, 50% of nominal
capacity after cell storage at 20℃ for
1year
When discharged at 190mA to 1.0V at
20℃
Fast Charge
:
475mA to 950mA (0.5 to 1C)
charge termination control
recommended control parameters:
-V
: 0-5mV
DT/dt :
0.8℃/min (0.5 to 0.9C)
0.8 - 1℃/min (1C)
TCO :
45 - 50℃
Timer : 105% nominal input
(for ref. only)
Service Life
: >500 cycles (IEC standard)
Continuous
Overcharge
: 95mA maximum current for 1 year.
No conspicuous deformation and/or
leakage
Weight
: 15.2g
Internal Resistance
:
Average 40m upon fully charged
(Max. 55m) at 1000Hz
Max. Charging Voltage
: 1.5V at 95mA charging
Ambient Temperature
Range
:
Standard Charge : 0 to 45℃
Fast Charging : 10 to 45℃
Discharge : -20 to 50℃
Storage : -20 to 35℃
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0 20 40 60 80 100 120 140 160
Voltage (V)
Capacity Input %
Fast Charge (Charge Control Required)
950mA
475mA
Model No
.:
GP
100AAAHC
E
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0 2 4 6 8 10 12 14
Discharge Time (Hrs)
Voltage (V)
Low Rate Discharge
475mA
(0.5C)
95mA
(0.1C)
190mA
(0.2C)
Charge:95mA x 16hrs at 20°C
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0 10 20 30 40 50 60 70
Discharge Time (Mins)
Voltage (V)
High Rate Discharge
2850mA
(3C)
950mA
(1C)
1900mA
(2C)
Charge: 95mA x 16hrs at 20°C
www.gpbatteries.com
The information (subject to change without prior notice) contained in this
document is for reference only and should not be used as a basis for product
guarantee or warranty. For applications other than those described here,
please consult your nearest GP Sales and Marketing Office or Distributors.
TRS1140 rev.00
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved