Data Sheet

Model No.: GP130AAHC
Type
: Rechargeable Nickel Metal
Hydride Cylindrical Cell
Nominal Dimension
(with Sleeve)
:
Φ = 14.5mm
H = 50.5mm
Applications
:
Recommended discharge current
130 to 3900 mA
Nominal Voltage
: 1.2V
Capacity
:
Nominal: 1300mAh
Minimum: 1300mAh
Typical: 1350mAh
When discharged at 260mA to
1.0V at 20℃
Charging Condition
:
130mA for 16 hrs at 20℃
Charging Retention
80% of nominal capacity after cell
storage at 20℃ for 12 months
When discharged at 260mA to
1.0V at 20℃
Fast Charge
:
650mA to 1300mA (0.5 to 1C)
charge termination control
recommended control parameters:
-∆V
: 0-5mV
DT/dt :
0.8℃/min (0.5 to 0.9C)
0.8 - 1℃/min (1C)
TCO :
45 - 50℃
Timer : 105% nominal input
(for ref. only)
Service Life
: >500 cycles (IEC standard)
Continuous
Overcharge
: 130mA maximum current for 1 year.
No conspicuous deformation and/or
leakage
Weight
: 25.0g
Internal Resistance
:
Average 25mΩ upon fully charged
(Max. 35mΩ) at 1000Hz
Max. Charging Voltage
: 1.5V at 130mA charging
Ambient Temperature
Range
:
Standard Charge : 0 to 45℃
Fast Charging : 10 to 45℃
Discharge : -20 to 50℃
Storage : -20 to 35℃
Fast Charge (Charge Control Required
Low Rate Discharge
High Rate Discharge
The information (subject to change without prior notice) contained in this
document is for reference only and should not be used as a basis for product
guarantee or warranty. For applications other than those described here,
please consult your nearest GP Sales and Marketing Office or Distributors.
www.gpbatteries.com
MRS6154 rev.02
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved