Datasheet

ManualsBrandsGP BATTERIES ManualsAppliance BatteriesCordless phone batteries 70AAAH3BMXZ T373 Suitable for brands: Ba

$SSURYDO6KHHW

Title: Approval sheet for GPRHC073N065

Revision: 0

To: Brands Group

Fr: GPI INTERNATIONAL LTD.

GP Part Number Description Customer P/N

GPRHC073N065 GPT373E-BU1+8583

Initiator

Checked by

Approved by

PM BU GPII

Name

XY Li Sunny Yeung Vivian fong Daniel Tong

Date

2017-08-31 2017-08-31 2017-08-31 2017-08-31

Attachment:

Item Revision Prepared by Checked by Approved by

Data Sheet 02 XH Ye Ling Guan Vivian Fong

Battery drawing 0 XuYang Li XuYang Li Sunny Yeung

Connector spec / / / /

Product Specification 0 JW Zhu WL Zhong Vivian Fong

Approved by Customer

Name

Date

Summary of content (10 pages)

PAGE 1
$SSURYDO 6KHHW Title: Approval sheet for GPRHC073N065 Revision: 0 To: Brands Group Fr: GPI INTERNATIONAL LTD.
PAGE 2
Modification History: Rev. 0 Description First issue The drawing link to the document drawing no. THD8583.
PAGE 3
Model No.: : Rechargeable Nickel Metal Hydride Cylindrical Cell Nominal Dimension : ) = 10.5mm (with Sleeve) H = 43.7mm Applications : Recommended discharge current 70 to 2100mA Nominal Voltage : 1.2V Capacity : Rated: 700mAh Typical: 730mAh When discharged at 140mA to 1.0V at 20ć Charging Condition : 70mA for 16 hrs at 20ć Charging Retention : 80% of rated capacity after cell storage at 20ć for 12 months When discharged at 140mA to 1.0V at 20ć Fast Charge : 350mA to 700mA (0.
PAGE 4
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. OLD DWG: PPD8583 3.
PAGE 5
Emboss Tape PH CONNECTOR 2.0mm pitch/Disconnectable Crimp style connectors 6 5 Specifications ––––––––––––––––––– 4 3 2 This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.
PAGE 6
PH CONNECTOR Contact Applicable wire Model No. 1.5 5.7 1 2.05 SPH-002T-P0.5S SPH-002T-P0.5L SPH-004T-P0.5S 2.08 2.85 mm2 AWG # Insulation O.D. (mm) 0.05 ∼ 0.22 30∼24 0.9∼1.5 0.08 ∼ 0.22 28∼24 0.8∼1.5 0.032∼0.08 32∼28 0.5∼0.9 Q'ty / reel 8,000 10,000 Material and Finish Phosphor bronze, tin-plated (reflow treatment) Crimping machine Contact Applicator Dies Crimp applicator MKS-L SPH-002T-P0.5S SPH-002T-P0.5L AP-K2N SPH-004T-P0.
PAGE 7
Product Specification Model No.: GPRHC073N065 (GPT373E-BU1+8583) Document Number: TQS5050 Revision: 00 Page 1 of 5 1. SCOPE This specification governs the performance of the following GP Rechargeable Nickel Metal Hydride Cylindrical Cell and its stack-up batteries. GP Model : GPRHC073N065 (GPT373E-BU1+8583) Cell Size: AAA The data involving nominal voltage and the approximate weight of the stack-up batteries shall be equal to the value of the unit cell multiplied by the number of cells in the battery.
PAGE 8
Product Specification Model No.: GPRHC073N065 (GPT373E-BU1+8583) Document Number: TQS5050 Revision: 00 Page 2 of 5 3. PERFORMANCE Before proceed the following tests, the packs should be discharged at 0.2C to 2.0V cut-off. Unless otherwise stated, tests should be done within one month of delivery under the following conditions: Ambient Temperature, Ta : 20 ± 5 ℃ Relative Humidity : 65 ± 20%RH Notes: Standard Charge / Discharge Condition Charge: 70mA (0.1C) ×16hrs Discharge: 140mA (0.2C) to 3.
PAGE 9
Product Specification Model No.: GPRHC073N065 (GPT373E-BU1+8583) Document Number: TQS5050 Revision: 00 Page 3 of 5 Vibration Resistance N/A ΔV< 0.02V/cell ΔRi (Internal Impedance) < 5m Ω/cell Charge at 0.1C for 16 hrs, and then leave for 24hrs,check battery before / after vibration Amplitude: 1.5mm Vibration: 3000CPM (any direction for 60mins) Unit Cell Impact Resistance N/A ΔV< 0.02V/cell ΔRi (Internal Impedance) < 5m Ω/cell Charge at 0.
PAGE 10
Product Specification Document Number: TQS5050 Model No.: GPRHC073N065 (GPT373E-BU1+8583) Revision: 00 Page 4 of 5 11. Do not solder directly to cells or batteries. 12. Store batteries in a cool dry place. 13. If find any noise, excessive temperature or leakage from a battery, please stop its use. 14. When not using a battery, disconnect it from the device. 15. When using a new battery for the first time or after long term storage, please fully charge the battery before use. 16.