Datasheet

ManualsBrandsGP BATTERIES ManualsAppliance BatteriesCordless phone batteries 60AAAH2BMJ T377 Suitable for brands: Alc

Approval Sheet

Title: Approval sheet for GPRHC063N013

Revision: 0

To: Brands Group

Fr: GPI INTERNATIONAL LTD.

GP Part Number Description Customer P/N

GPRHC063N013 GP60AAAH2BMJ-2U1+8941

Initiator

Checked by

Approved by

PM BU GPII

Name

XY Li Sunny Yeung Vivian fong Daniel Tong

Date

2017-08-31 2017-08-31 2017-08-31 2017-08-31

Attachment:

Item Revision Prepared by Checked by Approved by

Data Sheet 06 XH Ye Ling Guan Vivian Fong

Battery drawing 2 XuYang Li XuYang Li Sunny Yeung

Connector spec / / / /

Product Specification 0 JW Zhu WL Zhong Vivian Fong

Approved by Customer

Name

Date

Summary of content (10 pages)

PAGE 1
Approval Sheet Title: Approval sheet for GPRHC063N013 Revision: 0 To: Brands Group Fr: GPI INTERNATIONAL LTD.
PAGE 2
Modification History: Rev. 0 Description First issue The drawing link to the document drawing no. TPD8941.
PAGE 3
Model No.: Type 1.5 1.4 Charge:60mA x 16hrs at 20°C 1.3 1.2 1.1 1 0.9 300mA (0.5C) 0.8 120mA (0.2C) 0 2 4 6 8 10 Discharge Time (Hrs) High Rate Discharge 1.7 1.5 14 Charge: 60mA x 16hrs at 20°C 300mA (0.5C) 1.2 Voltage (V) 1.3 1.4 1.3 12 1.4 600mA (1C) 1.5 60mA (0.1C) 0.7 Fast Charge (Charge Control Required) 1.6 Voltage (V) GP60AAAH Low Rate Discharge Voltage (V) : Rechargeable Nickel Metal Hydride Cylindrical Cell Nominal Dimension :  = 10.5mm (with Sleeve) H = 43.
PAGE 4
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice. 1 2 增加套腸方向更改印字內容 Pad print direction H2--GP date Code H--Aug(month) 2--2012(year) GPRHC063N013 2.
PAGE 5
Crimp EH CONNECTOR Radial Tape Disconnectable Crimp style connectors 2.5mm (.098") pitch Features ––––––––––––––––––––––– • Compact and slim This connector is designed to be compact and unusually thin. It measures only 8.1mm (.319") high after mounting and is just 3.8mm (.150") wide. • Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying.
PAGE 6
EH CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. 5.7(.224) 2.85(.112) 2.05(.081) SEH-001T-P0.6 0.05 to 0.3 30 to 22 1.0 to 1.9(.039 to .075) SEH-003T-P0.6L 0.032 to 0.08 32 to 28 0.5 to 1.1(.020 to .043) 2.0(.079) 1.1(.039) Applicable wire Q’ty / AWG # Insulation O.D. mm(in.) reel mm2 10,000 Material and Finish Phosphor bronze, tin-plated Note: 1. Contact JST for gold-plated contacts. 2. SEH-003T-P0.6L is not TÜV approved. 1.6(.
PAGE 7
Product Specification Model No.: GPRHC063N013 (GP60AAAH2BMJ-2U1+8941) Document Number: TQS5051 Revision: 00 Page 1 of 5 1. SCOPE This specification governs the performance of the following GP Rechargeable Nickel Metal Hydride Cylindrical Cell and its stack-up batteries.
PAGE 8
Product Specification Model No.: GPRHC063N013 (GP60AAAH2BMJ-2U1+8941) Document Number: TQS5051 Revision: 00 Page 2 of 5 3. PERFORMANCE Before proceed the following tests, the packs should be discharged at 0.2C to 2.0V cut-off. Unless otherwise stated, tests should be done within one month of delivery under the following conditions: Ambient Temperature, Ta : 20 ± 5 ℃ Relative Humidity : 65 ± 20%RH Notes: Standard Charge / Discharge Condition Charge: 60mA (0.1C) ×16hrs Discharge: 120mA (0.2C) to 3.
PAGE 9
Product Specification Model No.: GPRHC063N013 (GP60AAAH2BMJ-2U1+8941) Document Number: TQS5051 Revision: 00 Page 3 of 5 Vibration Resistance N/A ΔV< 0.02V/cell ΔRi (Internal Impedance) < 5m Ω/cell Charge at 0.1C for 16 hrs, and then leave for 24hrs,check battery before / after vibration Amplitude: 1.5mm Vibration: 3000CPM (any direction for 60mins) Unit Cell Impact Resistance N/A ΔV< 0.02V/cell ΔRi (Internal Impedance) < 5m Ω/cell Charge at 0.
PAGE 10
Product Specification Model No.: GPRHC063N013 (GP60AAAH2BMJ-2U1+8941) Document Number: TQS5051 Revision: 00 Page 4 of 5 11. Do not solder directly to cells or batteries. 12. Store batteries in a cool dry place. 13. If find any noise, excessive temperature or leakage from a battery, please stop its use. 14. When not using a battery, disconnect it from the device. 15. When using a new battery for the first time or after long term storage, please fully charge the battery before use. 16.