Important safety instructions ENG • Follow this manual carefully for best results from your speakers • Avoid damp • Read and return warranty card • Avoid temperature extremes • Clean with a dry lint free cloth • Avoid direct sunlight • Do not use spirit based cleaners • SAFETY NOTICE! trailing cables are dangerous, secure all cables WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN • A combined main
English instructions ENG Controls and sockets Connection to stereo preamp / receiver V-20W Subwoofer Rear Panel Connect to amplifier speaker or preamp or subwoofer output. 1. 2. 3. 4. 5. LFE / Line in Smart Connect input Phase control Bass boost Level control Mains indicator light Power ON Set the crossover to 80Hz for large speakers or higher to match small speakers. Start with the volume set at the 7th dot. Adjust the volume to match output to your main speakers.
V-20W manual_V12-20130717.
V-20W manual_V12-20130717.indd 20 Issue 1: 07.2013 P/N: 4301-7464+0 www.kef.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body and must not be co-located in conjunction with any other antenna or transmitter.
