Catalogue Specifications....................................................................................... 1 What’s Inside The box ....................................................................... 1 Tablet Parts ......................................................................................... 2 Getting Started.................................................................................... 3 Connection to Internet .......................................................................
Specifications Display: 10.1 inches 1024X600 Resolution Resistive Screen CPU: Boxchip A10 RAM: 1GB DDR Internal Storage: 4GB Expansion Memory: USB & TF card, 32GB Max. Built-In Wireless: 802.11b/g/n AC Adapter: DC 5V-2A Operating System: Android 4.
Tablet Parts 2
Getting Started Battery Charging The tablet has a built-in rechargeable Li-polymer battery. 1. To charge connect the AC power adapter to the DC jack on the right side of the tablet. 2. The LED indicator will illuminate to show the battery is charging. The LED indicator will turn “OFF” when it’s fully charged. 3. The tablet can be used even if the battery is being charged. Power ON/OFF ON: 1. Press and hold the power button until the tablet turns “ON”. OFF: 1.
slot until it clicks into place. 2. A prompt will be seen on the screen saying “ Preparing SD card “ Removing TF card 1. Close all applications and documents which have been opened from the TF card. 2. Select “Setting” and find “Storage” then click “Unmount SD card”. 3. A prompt will be seen on the screen saying “ SD card safe to remove” 4. Gently press the TF card to remove and pull out the TF card. Note: Insert the TF card in correct position, otherwise it will damage the card and the slot.
Touch Screen The touch screen responds to finger touch as well as the stylus (touch pen) included with the device. Note: don’t place any object on the touch screen for it may damage or crush the screen. Single Click: single click one icon to choose the icon or option you want. Long Press: press and hold one icon to choose the icon and you can drag it to the bottom shortcut bar. Drag: drag on the screen and you can move between magic cube sides or drag the application icons into the shortcut bar.
appear notice cue. 2. Press Menu button to pop up Menu option, and click on Notice. 3. In the notification panel, click on the USB connection, then click Loading USB Storage Device. 4. Then the USB connection has been successfully. Connection to Internet Ethernet: 1. Connect the Ethernet cable to the Ethernet port of the tablet.
2. Select “Settings” and Select “ More…” then Select “Ethernet” Wireless: 1. Select “ Settings” 2. Select “Wi-Fi” and slide OFF to ON status. 3. All detected wireless networks in the area will e listed, Click to select desired wireless connection. 4. Enter WEP key or network key if necessary. 5. Once connected to a wireless network, settings will be saved 6. Wireless icon will appear on the taskbar when connected successfully.
Connect to 3G Network: First, you need to buy a 3G wireless card from your 3G service provider.(Please see “3G support list” at AppendixⅡ). Since our company is continuously committed to improving product quality and the software edition is always updating which will support more models in the future, please refer to the finished products. You have to buy above mentioned model to get access to 3G network. Insert your SIM card into the 3G card and then insert the 3G card into the USB port.
which means 3G connection is completed. Web Browsing Connect to the internet via Ethernet or wireless and launch the browser.
Time Return/Back Desktop Menu Wi-Fi network Install and Uninstall Install from memory card or USB drive Please go to APK Manager，Select “Install” and then select the file with the extension name .apk in the memory card. Select “Install” to install the software. Install application from internet You can use App Market to search any application you want, after download finish it will automatic install ** Go to http://Android.
After installation, you can run the software right away or run the software on the subcategory interface. Uninstall If you want to uninstall the software from a third party, please go to APK Manager, Select the software that you want to uninstall. You will see the following options: run, extract, uninstall and search. Click “uninstall” to uninstall the software.
1. Touch the icon at the bottom right and you can save your photos in DCIM/Camera directory in TF card. 2. Move the icon to film mode. on the right and you can switch camera mode 3. Touch the icon on the top right to see the previous picture and you can also delete, share, set it as the wallpaper or contact profile. Click finish button to exit camera interface.
HDMI You can switch the video to play it on the HDMI display equipment (such as TV with a HDMI interface) by HDMI. The maximum output resolution is 720p and its method is shown as follows: 1. Open the Tablet; 2. Connect the Tablet to TV by a HDMI cable. Open the TV; 3. Play video on the Tablet; 4. The video will be switched on the TV. Wait for more than 5 seconds; 5. You can switch by 3 methods: a) When the video play is finished, the video will be switched automatically back on the Tablet.
release memory and get the system speed back to normal. To close the application, click the icon on the shortcut bar to enter the system configuration interface. Select the Application → Running services and the interface is shown as follows: Tap the application you want to close. A pop-up window will be displayed. Tap “Stop” to close that application. Mandatory Power off 1. Press and hold the power button for 7 seconds and the device will be powered off. 2.
be powered off. Restore Default Setting If you want to reset the factory setting and erase all materials, please press Settings → Privacy → Factory data reset. ** Warning: Factory data reset setting will delete your Google account, data and configuration of system and applications and applications from downloading. **Please use this function carefully.
AppendixⅠ Frequently Asked Questions Q: Why won't my device turn on? Make sure your tablet has been charged for at least four hours prior to use. When plugging in the cable, make sure you are not accidentally plugging it into the headphone jack. Also, the power button is on the side (for tablets) and not the one on the front of the touchscreen. The button on the front is for navigation.
the instructions on how to perform the update: http://mymidpad.com/firmware/ Q: Why don't I see a firmware version for my model? We are always working on providing the latest and best firmware for all of our devices. If you don't see your specific model listed, please check back soon. Q: I don't remember my password, what can I do? If you have previously added a Google account, you may be prompted for a password reminder if you fail the security 4 or 5 times.
power source not being adequately filtered out. You may wish to give the unit a full charge and then disconnect from power for use, or, if possible, charge with a USB cable instead. Otherwise, your screen calibration may be off. To correct this, check for Settings->Touchpad Calibration to see if you can recalibrate this to resolve the issue.
AppendixⅡ 3G Support List NO. 3G Model Cellphone Model NO.
13 Huawei-E230 WCDMA 40 ZTE-AC580 CDMA2000 14 Huawei-E261 WCDMA 41 ZTE-AC581 CDMA2000 15 Huawei-E270 WCDMA 42 ZTE-AC590 CDMA2000 16 Huawei-E353 WCDMA 43 SEV759 CDMA2000 17 ZTE-MF110 WCDMA 44 ST804 CDMA2000 18 ZTE-MF637u WCDMA 45 ST809 CDMA2000 19 ZTE-MF633BP+ WCDMA 46 E1916 CDMA2000 20 ZTE-MF170 WCDMA 47 WU830 CDMA2000 21 ZTE-MF190 WCDMA 48 SRT-E800 CDMA2000 22 SRT-H800 WCDMA 49 ASB C820 CDMA2000 23 WU-830 WCDMA 50 Huawei-ET127 TD-SCDMA 24 W
