User's Manual

Interface Descri ption
Caps lock indicator
13
When this indicator is on, it indicates the uppercase state.
Camera
14
Built-in camera, 2 million pixels, 1600×1200 resolution.
USB A
15
Connect to external devices such as docking station and USB disk for data
transmission.
Connect to a mobile phone for charging or data transmission.
Connect to an external portable Wi-Fi or USB network card for Internet
access.
You can charge the peripherals through this interface, but cannot
charge this unit.
USB A
16
Connect to external devices such as docking station and USB disk for data
transmission.
Connect to a mobile phone for charging or data transmission.
Connect to an external portable Wi-Fi or USB network card for Internet
access.
You can charge the peripherals through this interface, but cannot
charge this unit.
RJ45 interface
17
It supports 10/100/1000/2500Mbps transmission rate.
The transmission rate should be as high as 2500 Mbps in LAN, and
super Category 6 or Category 7 network cable should be used. The target
computer is also provided with a 2.5G network card and a SSD. The
network speed should be as high as 2500Mbps in WAN.
Pre-drilled screw
hole on left shaft
18
It is a 2.5mm screw hole. You can design any different types of brackets
for fixation according to the use environment, or lift it by hanger
Pre-drilled screw
hole on right shaft
19
It is a 2.5mm screw hole. You can design any different types of brackets
for fixation according to the use environment, or lift it by hanger
Power button/
fingerprint
20
It is used to turn on, turn off, sleep, and wake up.
You can touch a key to unlock the system. When the desktop is locked,
you can unlock the Windows desktop depending on existing fingerprint
information.
You can turn it on by pressing this key for 2~3 seconds. When it is
turned on, press it quickly to put the machine to sleep, press it again
quickly to wake up the machine, and press and hold for 7 ~8 seconds to
shut it down.
Touchpad
21
It supports actions of up to 3 fingers.
Headphone/
microphone interface
22
3.5mm headphone/microphone 2-in-1 interface.
Microphone interface
23
Independent microphone interface
Air inlet
24
Cold air enters.
Air outlet
25
Hot air is discharged.
Interface Descri ption
Reset hole
26
Reset BIOS to the initial state with one click.
Keyboard
27
Input device. You can input characters or instructions by single key or
combination of keys.
It is a standard EIA RS-232 serial communication interface that supports
the connection of 9-pin serial devices.
This module should be purchased separately.
Serial port extension
module
28
It is a single-port control module, and is used to access and control the
underlying hardware for any network device and system without a
keyboard, mouse, and display.
This module is provided with one HDMI IN interface and one USB IN
interface. After the HDMI cable is connected, the built-in screen of
Pocket 3 can be used to display the process of startup, self-checking
and login system boot of the target devices, and the built-in keyboard
and mouse control target devices of Pocket 3 can be used. The USB IN
interface can be connected to a keyboard or mouse and can also be used
to control the target devices. This module should be purchased separately.
KVM control module
29