Users Manual

.23. .24.
Step 4: In the System Protection Local Disk (C :) dialog box, click to select “Disable System
Protection”, then “OK” at the bottom.
Shenzhen GPD Technology Co., Ltd.
System is broken, how can I re-install it?
Special reminder: Make sure that there is more than 50% capacity in the battery
(The charging current in WINPE mode is only 500mA, you need to ensure adequate power
before the upgrade).
Step 1: Adjust the “gamepad / mouse switch” to “mouse mode”
Step 2: Insert the U disk which is used for reinstalling the system into the USB port of the device
Step 3: Restart the device and press the DEL key to enter the BIOS.
Mouse
Mode
GPD WIN 2