Operation Manual

16
Repair
Rotor Replacement
To replace a rotor, gently pull it upwards and off of the motor shaft and replace it
with a new one. Take special care not to bend or break the motor shaft. If the rotors
are difcult to remove by hand, try a small set of tweezers or pliers.
It is extremely important to use the correct rotor, A or B, for replacement.
The marking can be seen on the top of the rotor near the center cap. Using the
incorrect rotor will make the craft impossible to control.
The craft comes with 4 replacement rotors, 2 A-type and 2 B-type.
REMINDER: Pilots are responsible for any damage caused by improper use.
Rotor A
FRONT
Matching rotors should be
diagonally opposed.
Rotor A
Rotor B
Rotor B