Operation Manual

17
If you are experiencing problems using or ying the craft, consult this table.
Troubleshooting
PROBLEM POSSIBLE CAUSES SOLUTION
Craft does not
respond to controls.
• No power to remote
or craft.
• Craft is out of receiver
range.
• Check remote batteries,
replace if needed.
• Check craft’s battery,
charge if needed.
• Be sure the remote has
an unobstructed line of
sight to the craft.
• Remain within the
remote’s 65 ft. range.
Craft is difcult
to control or ies
erratically.
• Gyroscopes may
be misaligned.
• Power OFF, recalibrate
remote and craft
(see pg. 10).
Craft drifts
while in ight.
• Trim not set or needs
adjustment.
• Adjust trim settings
(see pg. 12).
Craft suffers from
mechanical trouble.
• Damage to body,
rotors, or other major
components.
• Repair or replace parts
as needed.
LED lights ON
but craft does not
respond to controls.
• Low battery power. • Recharge the battery.