User’s Guide for Model DR397 v1903-01
Warnings & Precautions Important Safety Instructions • • • • • • • • • • • • • • • • • Read and follow all instructions. Keep these instructions for future reference. Heed all Warnings. Intended for children ages 14 and higher. Adult supervision is required. Only use attachments/accessories specified by the manufacturer. Before flying, always check the body, rotors, and battery for any damage or obstructions. Battery should be free from cracks or swelling.
Table of Contents Drone-asaur Quadcopter Drone – 5 Drone-asaur Quadcopter Drone Flying Tips & Features – 13 Features Includes Tips for Safe Operation Speed Setting Remote Control – 6 Parts & Repair – 14 Functions Battery Installation Parts Replacement Rotor Replacement Charging the Battery – 8 Troubleshooting – 15 Flying – 9 Customer Support – 16 Craft/Remote Link When You’re Done Flying Features Includes • 3 speed settings • 6-axis gyroscope • Remote control: requires 4 AAA batteries (not
Remote Control Functions Speed Press to change speed setting. Battery Installation Power Press to power ON. Press and hold to power OFF. Reset Press to reset remote trim settings. Use included screwdriver to remove battery cover. Pitch: push forward/ backward Yaw/Spin: push left or right Roll/Bank: push left/right 6 7 AAA 1.5V Right Control Stick Throttle: push forward/backward AAA 1.5V Trim Adjustment Left Control Stick AAA 1.5V AAA 1.5V Insert 4x AAA Batteries (not included).
Charging the Battery Flying Before charging, be sure the craft and remote control are powered OFF to avoid risk of injury or damage. It is recommended to remove the battery from the craft when charging. Charging time is approximately 90 minutes. Charge fully before use for maximum performance and flight time. Craft/Remote Link Connect the USB charging cable (included) to the USB port of a powered ON computer or USB power adapter (not included), then connect the charging plug to the battery plug.
Flying Trim Adjustment Setting Trim & Countering Drift Even after the craft is calibrated, it may show a tendency to drift while airborne. Adjusting the trim will help counter this effect and allow for better control the craft. • To avoid potential damage, adjust the trim while attempting a stable hover. • Try to avoid making any exaggerated movements with the flight controls. • Adjust one trim setting at a time to avoid confusion.
Trim Adjustment Flying Tips & Features Tips for Safe Operation Craft pitches/angles forward or backward. Adjust Pitch Trim. • It is recommended to only fly in large, open spaces that are free of obstacles like power lines, trees, ceiling fans, etc. • When flying indoors, avoid walls and ceilings, as the craft will be drawn towards them if closer than 2-3 feet. • Stand behind the craft when first taking off, so that you and the craft are facing the same “forward” direction.
Parts & Repair Troubleshooting REMINDER: Pilots are responsible for any damage caused by improper use. If you are experiencing problems using or flying the craft, consult this table. Parts Replacement Standard parts such as extra batteries and remotes are available online for purchase when in stock. However, any non-standard parts such as cameras, screws, bodies, SD cards etc. can be ordered by placing an inquiry with our parts department at: partsinfo@dpiinc.com.
Customer Support Contact Information Warranty Website: www.gpx.com See included 30 Day Warranty for warranty information. Warranty and the most up-todate version of this User’s Guide can also be found at: www.gpx.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.
