User Manual

22
PROBLEM POSSIBLE CAUSES SOLUTION
Hexacopter is
unresponsive
• No power to remote
or hexacopter
• Poor contact between
power plugs
• Check remote
batteries.
• Check hexacopter
battery, be sure it is
fully charged.
• Be sure the remote
has an unobstructed
line of sight to the
hexacopter.
• Be sure to remain
within the remote’s
250 ft. range.
Hexacopter
ies erratically
• Gyroscopes may
be misaligned
• Perform Pre-Flight
Calibration again
(see pg. 10).
• Perform factory reset
(see pg. 20)
Hexacopter drifts
while in ight
• Trim not set • Adjust trim settings
(see pg. 11).
Hexacopter suers
from mechanical
diculty or
vibrates excessively
• Damage to body,
rotors, or other major
components
• Check to make sure
the hexacopter has
not taken significant
damage.
• Replacement parts
may be needed
(see pg. 21).
Formation lights ON,
but hexacopter no
longer responds to
throttle inputs
• Low battery power • Recharge the battery.
If you are experiencing problems using or flying the hexacopter, consult this table.
Troubleshooting