USER’S GUIDE V: 917-01 TE3213B 32” LED TV For the most up-to-date version of this User’s Guide, go to www.gpx.
Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Avertissement: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
TE3213 Includes • • • Remote control: requires 2 AAA batteries (included) Removable stand Built-in AC power cord Setup Power Remote AC power: built-in AC power cable Requires 2 AAA batteries (included) OPEN 4
Table of Contents Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Volume Press to adjust the volume. Channel Press to adjust the television channel. Setup Press to view the television setup menu. Source Press and use the Arrow/ Enter buttons to adjust the source. Stereo Headphone Jack USB Port Optical Input RCA Stereo Inputs Component Video Input Composite Video Input HDMI Input 3 HDMI Input 2 HDMI Input 1 Audio Output 6 PC Audio Input VGA/PC Input RF Input Power Press to power the television off or on.
Power Press to power the television off or on. Source Press and use the Arrow/Enter buttons to adjust the source. Number Keypad Aspect Press to adjust the aspect ratio between WIDE, CINEMA, ZOOM, and NORMAL. Freeze Press to freeze or unfreeze the current frame in TV mode. Display Press to view the onscreen display. Favorites In TV mode, press to view your favorites list. Picture Press to adjust the picture between STANDARD, MOVIE, USER, and DYNAMIC.
Setup Connecting a TV Antenna Requires a TV antenna (not included). Connecting Basic Cable Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF Input on the television. 1. Connect a cable to the RF Input on the television. 2. Press the Source button to switch to TV mode. 2. Press the Source button to switch to TV mode. 3. Press the Setup button to access the setup menu. 3. Press the Setup button to access the setup menu. 4.
Channels Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the Source button to switch to TV mode. 2. Press the Setup button to access the setup menu. 3. Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button. 4. Press the Arrow () buttons to highlight Air/Cable. Press the Arrow () buttons to select AIR. 5. Press the Arrow () buttons to highlight Auto Scan.
Favorites and Clock Adding Favorites Setting the Clock 1. Press the Source button to switch to TV mode. 1. Press the Setup button to access the setup menu. 2. Press the Setup button to access the setup menu. 3. Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button. 4. Press the Arrow () buttons to highlight the Favorites icon. Press the Enter button. 5. Use the Arrow () buttons to select the desired channels and then press the Enter button. Viewing Favorites 1.
TV Menu and Parental Controls Parental Controls (V-Chip) 1. Press the Source button to switch to TV mode. 2. Press the Setup button. 3. Press the Arrow () buttons, highlight LOCK, and press the Enter button. 4. The default passcode for the parental lock is: 0000 5. Enter the passcode to access the LOCK preferences. 6. From this menu, you can lock specific ratings from the United States rating system or the Canadian rating system by accessing the V-CHIP settings.
Connecting Other Devices Connecting a Set-Top Box or Gaming Device You will need: a set-top box, composite and RCA stereo cables or an HDMI cable (not included). 1. Connect the device’s audio and video outputs to the corresponding audio and video inputs on the television. 2. Power the television on and press the Source button to switch to the connected input AV/ Component (YPrBr) or HDMI 1, 2 or 3.
Connecting Other Devices Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included). 1. Connect the computer’s VGA output to the VGA/PC Input on the television. 2. Power the television on and press the Source button to switch to the PC Mode. 3. Audio from the connected PC can be input to the television through the TV’s PC Audio Input by using a 3.5mm audio cable (not included).
USB Connecting a USB Thumb Drive 1. Load a USB thumb drive into the USB Port as shown in the image to the right. Using a USB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the Source button to switch to Media mode. 3. Use the Arrow and Enter buttons to select and play content from the connected USB thumb drive.
Mounting to a Wall Important Notes We recommend having this television professionally mounted.
Company Information International Support Green Initiative To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.gpx.
