Home Docking System Instruction Manual

Operations

Setting the Clock

a. On the Remote, press the TIME/CLK SET button.

b. Press the SKIP/SEARCH buttons to cycle up or down through the hours.

c. Press the TIME/CLK SET button to set the hour.

d. Press the SKIP/SEARCH buttons to cycle up or down through the minutes.

e. Press the TIME/CLK SET button to set the minute and nish setting the clock.

Setting the Alarm

a. On the Remote, press the AL SET button.

b. Press the SKIP/SEARCH buttons to cycle up or down through the hours.

c. Press the AL SET button to set the hour.

d. Press the SKIP/SEARCH buttons to cycle up or down through the minutes.

e. Press the AL SET button to set the minute and nish setting the alarm.

• After the alarm sounds, press the SNOOZE button to delay the alarm for an additional 9

minutes, or press the Power/AL OFF button on the remote to turn the alarm off.

Programming a CD

a. Insert a CD into the unit.

b. Press the FUNCTION button until the unit is in CD mode.

c. Press the SELECT/PROG button on the remote.

• The number 01 will blink once on the display, indicating that the song that is chosen next

will play rst.

d. Press the SKIP/SEARCH buttons to cycle through the tracks on the CD.

e. Press the SELECT/PROG button to select a track to play rst.

• The number 02 will blink once on the display, indicating that the song that is chosen next

will play second. This indication will blink every time a track is programmed.

f. Repeat steps d and e until the desired tracks have been programmed.

g. Press the PLAY/PAUSE button to begin playing the tracks. Use the SKIP/SEARCH buttons

to cycle through the programmed tracks at any time.

• To reset the programmed tracks, press the FUNCTION button to exit and re-enter CD

Mode.