User Manual

ManualsBrandsGPX ManualsCompact Radios & StereosGPX HM3817DTBK Home Music System with Remote and AM/FM Radio

GPX | HM3817DTBLK4

INTRODUCTION

OPEN/CLOSE

POWER

SLEEP/

ALARM SET

SKIP/TUNE

PLAY/

PAUSE

STOP

VOLUME

AM/FMCLOCK ADJ. MEM +

SOURCE

MODE/

PROGRAM

/ MINUTE / HOUR

AUX IN

R L

SPEAKER OUT

R L

LINE IN

CD DOOR

VOLUME

Press to adjust the

volume.

Press to switch

between Rock, Pop,

Jazz, or Classic eq

settings.

POWER

Press to power the

unit off or on.

Press to turn off the

alarm after it has

sounded.

SOURCE

Press to switch

between CD, Radio,

and AUX modes.

SLEEP/ALARM SET

Press to set the sleep

timer.

With the unit powered

off, press to set the

alarm.

SPEAKER OUTPUTS

AUXILIARY AUDIO

INPUT

FM WIRE ANTENNA

LINE INPUT (3.5mm)

STEREO

HEADHPONE JACK

LCD DISPLAY

The LCD Display

display’s the unit’s

current function,

clock, and alarm

times.

SKIP/TUNE

Press to adjust the

radio frequency,

change the CD

track, or to adjust

the minute and hour

when setting the

time or alarm.

OPEN/CLOSE

In CD Mode, press

to open or close the

CD Door.

STOP/AM/FM

In CD Mode, press

to stop a CD during

play.

In Radio Mode,

press to switch

between AM and

FM.

PLAY/PAUSE/

MEM+

Press to play or

pause a CD.

Press the to cycle

through saved radio

stations.

MODE/PROGRAM/

CLOCK ADJ.

In CD mode, press

once to repeat a

single song and

twice to repeat an

entire album.

In CD Mode, with a

CD stopped, press

to begin programing

a CD.

With the unit

powered off, press

to begin setting the

clock.

In Radio Mode,

press to save an AM

or FM radio station

to the unit’s memory.

DISPLAY

POWER

SOURCE

SLEEP/

AL SET

VOL –

MUTE

MODE/

CLK ADJ

TUNE +

TUNE –

VOL +

SNOOZE

M+

DISPLAY

Press to view the

clock on the LCD

display.

STOP/AM/FM

In CD mode, press

to stop a CD during

play.

In radio mode, press

to switch between AM

and FM radio modes.

CUSTOMER HELPLINE | 1-888-999-4215 GPX | HM3817DTBLK 5

CLOCK AND ALARM

Setting the Clock

Setting the Sleep Timer

Setting the Alarm

Cancelling the Alarm

1 Press the POWER button to power the

unit o.

2 Press the MODE/PROGRAM/CLOCK

ADJ. button, the time will begin to blink.

3 Press the SKIP/TUNE buttons to adjust

the hour and minute.

A PM INDICATOR will appear on the display

when the time is set in the PM. Make sure to

set the correct AM/PM as desired.

4 Press the MODE/PROGRAM/CLOCK

ADJ. button to set the adjusted time.

1 Press the POWER button until the unit is

turned on.

When the unit is on, the POWER button will

not be illuminated red.

2 Press the SLEEP/ALARM SET button

until “SLEEP” appears on the LCD.

3 Press the SLEEP/ALARM SET button

consecutively to adjust the sleep time

between 10 and 90 minutes.

4 After the allotted time has expired, the

unit will power o.

1 Press the SLEEP/ALARM SET button

twice to cancel the alarm.

The ALARM ICON on the display will

disappear.

2 To turn the alarm back on, after

cancelling, press the SLEEP/ALARM SET

button two more times.

The ALARM ICON will appear on the

display.

1 Press the POWER button to power the

unit o.

2 Press the SLEEP/ALARM SET button.

The time will begin to blink.

3 Press the SKIP/TUNE buttons to adjust

the hour and minute.

A PM INDICATOR will appear on the display

when the time is set in the PM. Make sure to

set the correct AM/PM as desired.

4 Press the SLEEP/ALARM SET button to

set the adjusted alarm time.

An alarm clock icon will appear on the LCD

Display when the alarm is set.

5 Press the SOURCE button to select CD,

RADIO, AUX, or BUZZER.

For BUZZER mode, the display will not show

any indication.

6 To stop the alarm after it has sounded,

press the POWER button.

GPX | HM3817DTBLK6

CD & LINE IN

Playing a CD

Programming a CD

If this is your rst time playing a CD on

this unit, remove the cardboard disc from

behind the CD DOOR before attempting to

play an actual CD.

1 Press the POWER button.

2 Press the SOURCE button until the unit is

in CD mode.

3 Press the OPEN/CLOSE button to open

the CD DOOR.

4 Insert a CD into the unit.

The loaded CD will begin playing

automatically.

1 Follow the steps for “Playing a CD”, then

press the STOP button.

2 Press the MODE/PROGRAM/CLOCK

ADJ. button.

“PGM” and “P-01” will appear on the

LCD display, indicating that the unit is in

program mode, and it is ready for the rst

track to be selected.

3 Press the SKIP/TUNE buttons to cycle

through the tracks on the CD.

4 Press the MODE/PROGRAM/CLOCK

ADJ. button to select a track.

“P-01” will change to “P-02”.

5 Repeat steps 3, 4, and 5 until the desired

CD tracks are programmed.

6 Press the PLAY/PAUSE button to begin

playing the programmed tracks.

7 To review the programmed tracks, stop

the CD, press the MODE/PROGRAM/

CLOCK ADJ. button repeatedly.

Using the Line Input

Requires a Line Input Cable (included)

1 Connect an audio device to the

LINE INPUT using the included line

input cable.

2 Press the SOURCE button to set the

unit to AUX mode, as indicated by the

LCD Display.

When the LINE INPUT is connected, the

AUXILIARY AUDIO INPUT will not work.

3 The audio device will now play through

the speakers of the player.

CUSTOMER HELPLINE | 1-888-999-4215 GPX | HM3817DTBLK 7

Note: This unit is not

compatible with MP3 CDs.

SNOOZE

After the alarm

sounds, press to

delay the alarm for

and additional 10

minutes.

SOURCE

Press the Source

button to switch

between CD, Radio,

and AUX modes.

SLEEP/ALARM SET

Press to set the sleep

timer.

Press, with the unit

powered off, to set

the alarm.

MODE/CLOCK ADJ.

Press, when playing a CD in CD Mode,

once to repeat a single song and twice to

repeat an entire album.

Press, in CD Mode, with a CD stopped, to

begin programing a CD.

Press, with the unit powered off, to begin

setting the clock.

Press, in Radio Mode, to save an AM or

FM radio station to the unit’s memory.

MUTE

Press the mute but-

ton to decrease the

volume entirely.

TUNE/SKIP/

In radio mode, press

to tune the AM or FM

radio.

In CD mode, press

to skip between

tracks on a loaded

CD. Press and hold

to search through an

individual track on a

loaded CD.

Press the EQ button

to switch between

Rock, Pop, Jazz, or

Classic eq settings.

POWER

Press to power the

unit off or on.

Press to turn off the

alarm after it has

sounded.

PLAY/PAUSE/M+

In CD mode, press

to play or pause a

loaded CD.

In radio mode, press

to cycle through

saved AM or FM

radio stations

VOLUME

Press the Volume

buttons to increase or

decrease the volume

of audio output from

the unit.

LINE IN

HM3817DT-1326-03-IB.indd 2 7/31/2015 2:29:17 PM