User`s guide

10 Customer Support: 1-888-999-4215 11
Clock Radio and 3.5mm Audio Input
Manually Setting the Clock Setting the Alarm
Turning the Alarm o and on
After the Alarm Sounds
Sleep Timer
To set the clock manually you must
undock and iPod or iPhone from the
clock radio.
1. With the clock radio powered o,
press and hold the PLAY/PAUSE/
MEM/CLOCK button for 2 seconds.
The hour will begin to blink on the
display.
2. Press the SKIP/SEARCH/TUNE±
buttons to adjust the hour.
3. Press the PLAY/PAUSE/MEM/
CLOCK button.
The minute will begin to blink on the
display.
4. Press the SKIP/SEARH/TUNE±
buttons to adjust the minute.
5. Press the PLAY/PAUSE/MEM/
CLOCK button to nish setting the
clock.
1. Press and hold the VOL -/ALARM
button for 2 seconds.
The hour will begin to blink on the
display.
2. Press the SKIP/SEARCH/TUNE±
buttons to adjust the hour.
3. Press the VOL -/ALARM button.
The minute will begin to blink on the
display.
4. Press the SKIP/SEARH/TUNE±
buttons to adjust the minute.
5. Press the VOL -/ALARM button.
6. Press the SKIP/SEARH/TUNE±
buttons to adjust the alarm source
between buzzer, FM radio, and
iPod/iPhone.
1. With the clock radio powered o,
press the VOL -/ALARM button
twice to activate or deactivate the
alarm.
An alarm indicator will appear
on the display when the alarm is
activated.
1. After the alarm sounds, press the
SNOOZE button to delay the alarm
for an additional 9 minutes, or
press the POWER button to turn
the alarm o.
1. With the clock radio powered on,
press the SNOOZE/SLEEP/LIGHT
button repeatedly to set the sleep
timer.
A sleep icon will appear on the
display when the sleep timer is set.
2. After the set sleep time has expired
the clock radio will automatically
power o.
To turn the sleep timer o, press
the SNOOZE/SLEEP/LIGHT button
repeatedly until OFF appears on the
display.
Using the 3.5mm Audio InputTuning the FM Radio
Saving a Station as a Preset
Tuning to a Preset Station
Requires a 3.5mm audio cable (not
included)
1. Connect a 3.5mm audio cable to
the 3.5MM AUDIO INPUT on the
boombox and an audio output
on an MP3 player or other audio
source.
2. Press the SOURCE button to
switch to AUX mode.
3. Use the native controls on the
connected MP3 player or other
audio source to play and control
audio played through the
boombox.
1. Press the SOURCE button to
switch to FM radio mode.
An FM radio icon will appear on the
display.
2. Press the SKIP/SEARCH/TUNE±
buttons to tune the FM radio.
1. Follow the instructions for Tuning
the FM Radio.
2. Press and hold the PLAY/PAUSE/
MEM/CLOCK button for 2 seconds.
The preset numbers will begin to
blink on the display.
3. Press the SKIP/SEARCH/TUNE±
buttons to select a preset.
4. Press the PLAY/PAUSE/MEM/
CLOCK button to save the current
station to the selected preset.
1. Follow the instructions for Tuning
the FM Radio and Saving a Station
as a Preset.
2. Press the PLAY/PAUSE/MEM/
CLOCK button repeatedly to
cycle through saved preset radio
stations.